Other Parts Discussed in Thread: INA211, INA190, INA186
Hi Team,
We are using INA211 / INA212 current sense amplifier to measure current in our design. When we tried doing simulation we were not getting expected output when the current goes below 10uA.
However we were able to get proper output when the current is above 1mA. What may be the reason for this behavior??
We couldn't find anything related to minimum measurable current or minimum shunt voltage in the datasheet. It could be helpful if we can get the related data.
And Is there any INA suggested for measuring current in uA range?
Attached below the INA212 reference circuit simulated in LTspice for your reference.
Regards,
Anand M