THS4303: THS4303EVM: Request for Altium PCB design files

Thank you so much

Could you please tell me which PCB design software is used to open THS4303RGT（PCB file) ?

Sorry, my customer can't open the pcb and sch file, the size is only 1KB. 

Hello Yanni,

   Sorry about this, I tried opening the files on my end as well and I kept getting errors as well. I did find another set of PCB/SCH with higher size than 1KB for the THS4303 which I have attached below, but those files are also giving errors. Since, the Gerber files within the zipped folder seems to be working, I tried following an Altium guide to reverse engineer the design. I ran into some errors there and waiting on Altium support. I will update you when they respond. The customer in the meantime can view these Gerber files by creating a new CAM document in Altium, and selecting File --> Import --> Gerber and File --> Import --> Drill. The drill files in the zipped folder is DRL and NCD, the rest are Gerber files. 

THS4303RGT.SCH

3377.THS4303RGT.PCB

Thank you,

Sima 

Hi SimaJalaleddine,

Thank you for your help.but my customer said that the gerber files is not working.

Hello Yanni,

   Altium support helped reverse engineer the Gerber files to this PCB board. I have attached the Gerber files, Cam document, and PCB board for the THS4303 below. 

THS4303_Altium_Files.zip

Thank you,

Sima