• State TI Thinks Resolved
  • Locked Locked
  • Replies 5 replies
  • Answers 2 answers
  • Subscribers 32 subscribers
  • Views 796 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5717: TAS5717 must need always MCU after finish software download using JIG?

MYUNG SIK KIM
Intellectual 595 points
Part Number: TAS5717
Other Parts Discussed in Thread: TAS5760MD

HI, everyone.

I need information about TAS5717.

If I finish software coding using GDE to download TAS5717 then TAS5717 always need MCU for I2C commucation ?

TAS5717 does not have memory to keep register setting?

It means when I power reset(ON/OFF) TAS5717 require re-setting(again I2C data) after once software download?

Always when Power ON TAS5717 need new I2C data with MCU?

Or, Just one time need I2c data for downloading software then TAS5717 remember before I2C data?

Could someone let me know about that?

Thanks,

Best regards,

KIM

 

  • 0
    TI__Expert 6985 points
    Hello Kim! This looks like a duplicate entry? Please refeeence my last response: Hello Kim! As a slave device the TAS5717 will still need a clock per page 9 of the datasheet. With that said , there are other options to support this. Please also refeence: e2e.ti.com/.../586751

    Also, Shawn can help you with further questions.

    thanks, Jeff
  • 0
    TI__Mastermind 24835 points

    Hi Myung Sik,

    There is no non-volatile memory(flash, ROM..) for customer usage on TAS5717. So the device configuration which is achieved by GDE GUI(e.g. DRC cfg, EQ setting....) need to be written by I2C from the host every time power on the device. GDE GUI is only used to develop the software/firmware cfg on the audio amplifier for customers.

    Best regards,

    Shawn Zheng

  • 0 in reply to Shawn Zheng
    Intellectual 595 points
    Hi, Shawn

    Are there any Audio IC TAS57xx series Texas Instrument no has non-volatile memeory(Flash...)?

    If yes, How can I make a source code(C-language) using GDE?

    I want to use MicroChip PIC-series so,I need C source code to control TAS5717 using I2C.

    Thanks.

    Best regards,
    KIM
  • 0 in reply to MYUNG SIK KIM
    TI__Mastermind 24835 points
    Hi Kim,
    Please check TAS5760MD, which supports hardware control mode and headphone channel. But BQ or DRC programming is actually not supported. If you are interested in this device and have more question on it, please post another question in E2E forum. Our application expert for this device will answer your any question.
    Best regards,
    Shawn Zheng