Asking for the amp with I2S in and I2S output

SHH

Mastermind 30251 points

Other Parts Discussed in Thread: TAS5780M, TAS5756M, TAS5782M, TAS5766M, TAS5754M

Hi team,

Do you have recommendation for the I2S input/I2S output amp?(stereo 10W+10W)

Thanks,

SHH

over 6 years ago

0 Shawn Zheng over 6 years ago

TI__Mastermind 24835 points

Hi Scott,
Most of our close-open digital input amp supports SDOUT. e.g. TAS5754M, TAS5756M, TAS5766M, TAS5780M, TAS5782M ......
Andy is the expert on these devices, you can contact him for more info.
Best regards,
Shawn Zheng

0 SHH over 6 years ago in reply to Shawn Zheng

TI__Mastermind 30251 points

Hi Shawn,

Customer would like to do the 5.1.4 ch design(total 10ch). Can our device support the TDM mode and how to setting?
for example:
10 ch need 5 TAS5782M.
Can the TDM for mat support up to 10ch data inside? And how to mapping the 10ch data to different 5 amps? And what is the max resolution and sampling frequency if we can support multiple TDM format?

thanks,
SHH

0 Shawn Zheng over 6 years ago in reply to SHH

TI__Mastermind 24835 points

Hi Scott,
Andy is the expert in TAS5782M, and he will help to answer this soon later.
Best regards,
Shawn Zheng

0 Shawn Zheng over 6 years ago in reply to Shawn Zheng

TI__Mastermind 24835 points

Hi Scott,
Considering that we are communicating off-line, could you please close this question in E2E? Thank you.
Best regards,
Shawn Zheng

Audio

Audio forum

Asking for the amp with I2S in and I2S output