This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TINA/Spice/TL082A: the spice model which is in TINA is not working

Prodigy 195 points

Replies: 9

Views: 154

Part Number: TL082A

Tool/software: TINA-TI or Spice Models

hi,

TINA is showing some kind of error while compiling the TL082 macro file.Plz any one help me to edit the macro file error.

  • Hi Aftab,

    Can you please screenshot and share a picture of your error?

    Best Regards,

    Bala Ravi

  • In reply to Bala Ravi:

  • In reply to Aftab Ashraf Av:

    Hi Aftab,

    Please attach the TINA file in your reply, so I can check what's wrong with it.

    Best Regards,

    Bala Ravi

  • In reply to Bala Ravi:

  • In reply to Aftab Ashraf Av:

    Wow, where did that model come from - going into the macro it says it is a THS3091 model , a high output CFA op amp, here is your circuit with the TINA 11 library model - apparently encrypted so you cannot read the macro, 

    8424.BPF with TL082.TSC

    Michael Steffes

  • In reply to Michael Steffes:

    thank u,the model is from the ti site only.

  • In reply to Aftab Ashraf Av:

    Well that seems like something worthy of fixing - dropping in the TINA library model, your circuit ran fine. 

    Michael Steffes

  • In reply to Michael Steffes:

    Hello Aftab,

    This TSC file just has a TL082 device placed from the Tina library.

    Just copy the device to your TI tina schematic.

    Just TL082.TSC 

    Regards,
    Ronald Michallick
    Linear Applications

    TI assumes no liability for applications assistance or customer product design. Customer is fully responsible for all design decisions and engineering with regard to its products, including decisions relating to application of TI products. By providing technical information, TI does not intend to offer or provide engineering services or advice concerning Customer's design. If Customer desires engineering services, the Customer should rely on its retained employees and consultants and/or procure engineering services from a licensed professional engineer (LPE).

     

  • In reply to Ron Michallick:

    thank u

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.