• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 49 subscribers
  • Views 1133 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TL082: TL082 abnormal output waveform

Nam, Dino
Expert 5775 points
Part Number: TL082

Hello team,

Please review below schematic and output waveform. I think below output is abnormal(redbox).Would you please let me know your opinion why abnormal output is occured?

<Schematic>

<Waveform>

Thank you.

  • 0
    TI__Guru*** 140026 points

    Dino,

    Two reasons.

    First is that input common mode range only goes down to VCC- + 4V

    Second is a non-inverting input is close to VCC- will forward bias JFET gate to drain and makes the output high.

    Check out device schematic in data sheet and you will see this too.