This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

THS7360: output amplitude scaling problem

Intellectual 2145 points

Replies: 3

Views: 357

Part Number: THS7360

Hi, 

the output waveform of red and blue signal are over spec, please help to comment if there are ways to improve. 

Please refer to the schematic and waveform below: 

Please help to comment how to adjust the amplitude to pass the output voltage limit. 

Thanks for your help.

  • Hi user0218654,

    Have you verified the tolerance of the impedance matching resistors on those channels? That might possibly slightly increase the output voltage.

    Best regards,

    Sean
  • In reply to Sean Cashin:

    Can you please indicate whether or not this resolved your issue?
  • In reply to Sean Cashin:

    Hi 

    Going to test but haven't get result yet. 

    thank you.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.