This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

OPA2374: The output increase suddenly

Expert 2660 points

Replies: 2

Views: 321

Part Number: OPA2374

Hi Team

   My customer use OPA2374 for the PFC current senseing in a power mode. When the PFC MOSFET Q7-1 turn off, the output of opa2374 is increased suddenly, and it is not normally. Below is the schematic and test waveform. Pls. help to give some suggestion. thanks

  • Hi Aggli,

    C40 looks weird! Remove it and place a 10p cap in parallel with R51. If the low pass filtering effect is too little, increase this cap and C39, but keep the both caps identical. Otherwise the common mode rejection of this difference amplifier will degrade.

    Take care, the common mode input voltage range of OPA2374 is only 0.2V below GND. If you violate this specification the OPA2374 will stop working properly.

    Kai

  • In reply to kai klaas69:

    Hi Kai
    thank you for your comment, and we will try. we will update the result to you later.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.