INA215: Bake Conditions for Drying SMD’s at the INA215

Peter Chen(ICP_FAE)

Part Number: INA215

customer would like to bake their INA215 inventory them self. they would like to check TI's bake Conditions for Drying SMD’s at the INA215.

Can we have the bake condition for customer's reference.

over 5 years ago

0 Peter Iliya over 5 years ago

TI__Mastermind 26660 points

Hey Peter,

I will need to look into this. What is customer trying to accomplish with this bake: reduce board stresses and moisture?

Sincerely,
Peter Iliya

0 Peter Chen(ICP_FAE) over 5 years ago in reply to Peter Iliya

TI__Intellectual 2480 points

they would like to do bake to reduce moisture. Does any documents describe the bake condition?

0 Peter Iliya over 5 years ago in reply to Peter Chen(ICP_FAE)

TI__Mastermind 26660 points

Hey Peter,

I am not finding any documents that are specific to our device, but I have spoken with our engineers and to completely remove moisture a bake at 125°C for 24 hours will be enough.

Sincerely,

Peter Iliya

Current Sensing Applications

Amplifiers

Amplifiers forum

INA215: Bake Conditions for Drying SMD’s at the INA215