Hi,
Noise is specified 0.6uVpp on the datasheet.
How much does this contribute to output current noise?
I would like to know the equation to calculate it.
Best Regards,
Kuramochi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Noise is specified 0.6uVpp on the datasheet.
How much does this contribute to output current noise?
I would like to know the equation to calculate it.
Best Regards,
Kuramochi
Hello Kuramochi-san,
Thank you for your post.
The input referred voltage noise as specified in the datasheet is 0.6µVpp from 0.1Hz to 10Hz. This can be converted to output current noise using the equation shown on the first page of the datasheet:
Io = (100*Vin) / Rin, where Vin is your input referred voltage noise of 0.6µVpp from 0.1Hz to 10Hz
If you take this Io and multiply it by your load resistance (RL), that will be your output voltage noise.
-Tamara Alani