This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

INA220: About INA220 address latching

Expert 5065 points

Replies: 1

Views: 78

Part Number: INA220

hi dear supporting team,

for INA220 Address latching, will it be identify on powering up or over every time I2C communication lauching? ii.e if after power up, we change the address, will it be identified ? tks a lot!

  • Hello Vera,

    According to section 8.5.4.1 of the datasheet, the address pins are sampled at the start of each communication event. Changing the connection of the address pins after power up is no problem, they just need to be at the desired value before the next communication begins.

    If this answered your question, please click the green button "This resolved my issue." Thanks!

    Best regards,

    Ian Williams
    Applications Manager
    Current & Magnetic Sensing

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.