This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

TLV2371-Q1: wire bond and pad material

Prodigy 20 points

Replies: 5

Views: 88

Part Number: TLV2371-Q1

Please share information about:

Wire bond material , Pad material for TLV2371-Q1 and TLV2371

  • Kamal,

    Welcome to the e2e forums. Wire and pad material is proprietary information that I cannot share.

    Is there something else that I can help you?

    Regards,
    Ronald Michallick
    Linear Applications

    TI assumes no liability for applications assistance or customer product design. Customer is fully responsible for all design decisions and engineering with regard to its products, including decisions relating to application of TI products. By providing technical information, TI does not intend to offer or provide engineering services or advice concerning Customer's design. If Customer desires engineering services, the Customer should rely on its retained employees and consultants and/or procure engineering services from a licensed professional engineer (LPE).

     

  • In reply to Ron Michallick:

    Thanks for your prompt Replay,

    could you please share the difference(reliability)  between Automotive and industrial grade TVL2371 opamp,

    TVL2371-Q1

    TLV2371

  • Hi Kamal,

    haven't you seen this on the product sites?

    By the way, why is the bond material and pad material important for you?

    Kai

  • In reply to kai klaas69:

    Hi Kamal,

    if my links don't work, go to the product's site, click "Ordering&quality", click "View" at "Material content" and finally click on the TI's part number of your desired chip. Then, scroll down.

    Kai

  • In reply to kamal kumar:

    Kamal,

    Start with reliability page; https://www.ti.com/support-quality/reliability/reliability-home.html

    Then select Qualification Summary from that page

    Regards,
    Ronald Michallick
    Linear Applications

    TI assumes no liability for applications assistance or customer product design. Customer is fully responsible for all design decisions and engineering with regard to its products, including decisions relating to application of TI products. By providing technical information, TI does not intend to offer or provide engineering services or advice concerning Customer's design. If Customer desires engineering services, the Customer should rely on its retained employees and consultants and/or procure engineering services from a licensed professional engineer (LPE).

     

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.