This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

LMV321-N-Q1: Thermal Resistance from Junction to Case (θjc) and Charged Device Model (CDM) of ESD

Genius 9030 points
Danilo Austria

Replies: 3

Views: 103

Part Number: LMV321-N-Q1

Hi Team,

A customer is requesting for the Thermal Resistance from Junction to Case (θjc) and Charged Device Model (CDM) of ESD of LMV321Q1M5X/NOPB.

Regards,

Danilo

Genius 9030 points
Danilo Austria
  • Genius 10010 points
    Daniel_Miller

    Hello Danilo,

    For the thermal resistance value, I will most likely need to submit an internal request to obtain this information.  It will probably take a few days to hear back.  I will have an update for you as soon as I hear back, say early next week.

    As for the CDM data, I don't believe we have this anywhere.  I'll look closer and let you know within 24 hours whether or not I was able to find the data.

    Regards,

    Daniel

  • Genius 113245 points
    Ron Michallick

    Hello Danilo,

    Theta JC, top 176.1 C/W
    Theta JB 75.5 C/W
    Psi JT 59.4 C/W
    Psi JB 75.0 C/W

    CDM tested and passed up to 1kV

    Regards,
    Ronald Michallick
    Linear Applications

    TI assumes no liability for applications assistance or customer product design. Customer is fully responsible for all design decisions and engineering with regard to its products, including decisions relating to application of TI products. By providing technical information, TI does not intend to offer or provide engineering services or advice concerning Customer's design. If Customer desires engineering services, the Customer should rely on its retained employees and consultants and/or procure engineering services from a licensed professional engineer (LPE).

     

  • Genius 9030 points
    Danilo Austria

    In reply to Ron Michallick:

    Hi Ronald,

    Thank you for this info.

    Regards,

    Danilo

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.


All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms of use of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms of use of this site. TI, its suppliers and providers of content reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.

TI worldwide | Contact us | myTI login | Corporate citizenship

TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.

© Copyright 1995-2021 Texas Instruments Incorporated. All rights reserved.
Trademarks | Privacy policy | Terms of use