• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 48 subscribers
  • Views 208 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

THP210: Seems like an error in the datasheet

Danilo A.
Mastermind 24705 points
Part Number: THP210

Hi Team,

A customer noticed what seems to be an error in the datasheet. May I ask your help to investigate on this.

At page 9 of the THP210 datasheet, Figure 11 says Small-Signal Step Response, but the input signal is 11V peak. Also, the time scale is 20 us/div, whereas the Large-Signal response in Figure 9 is at 2 us/div. Is this correct?

Regards,

Danilo

  • 0
    TI__Mastermind 49405 points

    HI Danilo,

    I believe that the title of the Figure 11 is incorrect, and should read 'Output Overload Recovery'; however, I still will verify with the product line on the units of x axis.The datasheet will be updated soon, within the next month. I will provide the feedback to the systems engineer and get back to you on verification of the x axis units of Figure 11.

    Thank you and Regards,

    Luis