This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

LMH32401: PSpice Simulation

Genius 9520 points

Replies: 2

Views: 40

Part Number: LMH32401

Hello Guys,

Good day.

Our customer is simulating the LMH32401 P-Spice model and wants to leave the Vocm output free. How to do this because the software is telling him that it has to be connected to something.

Thanks in advance!

Art

  • Hello Art,

    I've tested this on TINA and the model should be able to function without a voltage applied to the Vocm pin. A warning does appear but can be ignored. If Pspice is not allowing you to do this, you can add 1T-ohm resistor going to ground at the Vocm pin. This should have the same effect.

    Best,

    Hasan Babiker

  • In reply to Hasan Babiker31:

    Thanks Hasan!

    Art

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.