This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

ALERT Pin be used for OCP only.

Genius 4090 points

Replies: 1

Views: 35

Part Number: INA260

Hello

Could ALERT Pin be used for OCP only?

How do I to configure if available?
Best regards.
  • Hello Louis,

    Thanks for considering to use Texas Instruments.  Yes it can be used for OCP only.  While the ALERT can be asserted for several different triggers, only one trigger source can be specified at a time.  The trigger setting with the highest bit value in the register takes priority if multiple triggers are enabled, and only that trigger is monitored.

    Best Regards,

    Patrick Simmons, TI Sensing Products Applications Support

    Getting Started with Current Sensing Video Training Series

    TI makes no warranties and assumes no liability for applications assistance or customer product design. You are fully responsible for all design decisions and engineering with regard to your products, including decisions relating to application of TI products. By providing technical information, TI does not intend to offer or provide engineering services or advice concerning your designs.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.