This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM7171: Need country of origin data.

Prodigy 70 points

Replies: 6

Views: 84

Part Number: LM7171

Country of origin needed for the following device; 5962-9553601QPA.  

Thanks.

6 Replies

  • Hello Steve, 

    I've sent you a direct message on E2E to resolve this outside of the forums.

    Best,

    Hasan Babiker

  • In reply to Hasan Babiker31:

    This is standard documentation that every mil contractor needs.  This is a 5962 number I would think you could just email it to me or point me to where it is located on the web.

  • In reply to Steve Allen:

    Hello Steve,

    Here is a link to the SMD document. You can find it under the technical documentation section of the LM7171QML product page:

    Best,

    Hasan Babiker

  • In reply to Hasan Babiker31:

    Hasan,

    I don't see where it states the country of origin in the document.

  • In reply to Steve Allen:

    Hello Steve,

    The LM7171QML has multiple assembly sites, please send me a direct message to help figure out where your parts were assembled. Or are you asking where the part was fabricated?

    Best,

    Hasan Babiker

  • In reply to Hasan Babiker31:

    That is the difficulty Steve, the wafer fab site rarely moves (and I think this one is maybe one of the Portland, ME National fabs), but the assembly and test sites move all over asia. LIkely Malaka being a national part. 

    Michael Steffes

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.