This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Does TI have integrated 4-20mA transmitters for inputs from bridge sensors?
Learn more about XTR products here
Yes. When using a bridge sensor, take care that your input signal is properly conditioned. See the attached articles to learn how to use an amplifier with optimized positive feedback to correct for nonlinearities in your sensor. TI's XTR106 includes 2.5V and 5V excitation sources, linearization, and amplification for a bridge sensor input.
Signal Conditioning and Linearization of RTD Sensors
Analog Linearization of RTDs
TI devices: XTR106, PGA309 with XTR117
The following reference design goes through the theory, component selection, simulation, complete PCB schematic & layout, bill of materials, and measured performance results of a 2-wire (loop-powered) 4-20mA sensor transmitter (XTR117), and PGA309 providing linearization and temperature compensation to a differential bridge sensor voltage. Circuit modifications that help to meet alternate design goals are also discussed.
Figure 1 in the XTR106 datasheet + the Applications Information section on page 9 is also a good design reference.
XTR106 Datasheet: Figure1
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.