INA212-Q1: to decrease current consumption

Takao Yamamoto5

Expert 1690 points

Part Number: INA212-Q1

Dear all,

Could you teach me how to decrease current consumption?

I consider about the current consumption when system is off.

Best regards,

over 5 years ago

0 Marek Lis over 5 years ago

TI__Guru 60610 points

When the system is off, the power consumption should be zero unless you have leakage path for the current to flow. How do you turn off the power? Please show your circuit schematic so we can understand what you are trying to do.

Also, please review attached Application Report.

Power-Saving Topologies for TI Current Shunt Monitors.pdf

0 Dennis Goeke over 5 years ago in reply to Marek Lis

TI__Genius 11135 points

Takao

Did this resolve your issue? If not, just post another reply below.

Thanks

Dennis

0 Takao Yamamoto5 over 5 years ago in reply to Dennis Goeke

Expert 1690 points

I am checking detail system with my customer.
After checking, I will provide schematics and ask you check.

Best regards,

0 Patrick Simmons over 5 years ago in reply to Takao Yamamoto5

TI__Mastermind 21795 points

Hello Takao,

We have not heard from you for roughly a week now. As such we presume that you no longer need support on reducing your customer's current consumption. Thus we will close this thread. However, if you still need support please upload your schematic or connect with one of the TI employees in this thread to share the schematic privately.

Amplifiers

Amplifiers forum

INA212-Q1: to decrease current consumption