INA229: Cannot find IBIS model for INA229AIDGSR

Glenn Doiron

Prodigy 135 points

Part Number: INA229
Other Parts Discussed in Thread: INA226

I can't find any IBIS models for INA229AIDGSR.

I need the models for the digital communication lines, CS/SCL/MOSI/MISO, and also ALERT, to run SI tests on my board.

Thanks,

Glenn

over 3 years ago

0 Mitch M over 3 years ago

TI__Genius 17990 points

Hello Glenn

We currently do not have the IBIS model for the INA229. I am looking into this to see if this is still something we support or not. I will keep you posted, and hopefully I will know more by the end of the week.

0 Mitch M over 3 years ago in reply to Mitch M

TI__Genius 17990 points

Glenn,

I am still looking into this, and hope to have a response by Wednesday of next week.

0 Mitch M over 3 years ago in reply to Mitch M

TI__Genius 17990 points

Glenn,

Sorry this is taking longer than expected. We no longer have a dedicated team for IBIS models, so I am still looking into whether or not this is supported. I should have more info by Monday...

0 Mitch M over 3 years ago in reply to Mitch M

TI__Genius 17990 points

Glenn,

Looking into this is taking longer than expected. Is there a specific time you need this info by?

0 Mitch M over 3 years ago in reply to Mitch M

TI__Genius 17990 points

Glenn,

I just talked with the designers, and they said that the IBIS model for the INA226 should be very similar. It can be found here: https://www.ti.com/lit/zip/sbom458

It does not look like we will have an INA229 specific IBIS model soon.

Amplifiers

Amplifiers forum

INA229: Cannot find IBIS model for INA229AIDGSR