TINA-TI: support the ANALOG BEHAVIORAL MODELING from PSPICE

Jason Shen

Intellectual 1945 points

Part Number: TINA-TI

Dears

Could our TINA-TI support the ANALOG BEHAVIORAL MODELING? which have mentioned here.

http://www.ecircuitcenter.com/SPICEsummary.htm

for the FREQ model, thanks

FREQ

E|G{name} {+node} {-node} FREQ {expression} (freq, gain, phase)*

Examples:

EAMP 5 0 FREQ {V(1)} (1KZ, 10DB, 0DEG) (10KHZ, 0DB, -90DEG)

Jun Shen

over 3 years ago

0 LeonardEllis over 3 years ago

TI__Guru 71516 points

Hello Jun,

Thank you for your inquiry about TINA. Since TINA is a DesignSoft/TINA program, questions are handled by using the DesignSoft support page: http://www.tina.com/technical-support/ .

The DesignSoft/TINA team is very helpful and this is the most direct way for TINA support. Please advise by Reply when the issue has been resolved.

Regards,

~Leonard

Amplifiers

Amplifiers forum

TINA-TI: support the ANALOG BEHAVIORAL MODELING from PSPICE