• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 49 subscribers
  • Views 1055 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ONET1151P: Default status of Outputs

F.N
Expert 8760 points
Part Number: ONET1151P

Hi team,

My customer wants to know ONET1151P default status of outputs.

ONET1151P has Dis pin and DIS register bit.

I have following 2 questions.

(1) Which one is given priority? Is it pin or register bit?

(2) Which one is default register bit status? Is it 0 or 1?

Please let me know.

Best regards,
Fumio Nakano

  • 0
    TI__Intellectual 1715 points

    Hi Fumio-san,

    Please see my response to the customer's questions below:

    (1) Which one is given priority? Is it pin or register bit?

    Sri: For the device output to be enabled for this device, both DIS pin and the DIS register bit must be set to "enable" configuration. That is, DIS pin should be low and DIS register bit must be set to "0". 

    (2) Which one is default register bit status? Is it 0 or 1?

    Sri: The default register bit status is "0", i.e., it is in enabled state.

    Hope this helps, please let me know for further clarifications.

    Thanks,

    Sri

  • 0 in reply to Sriharsha Kota Pavan
    TI__Expert 8760 points

    Hi Sriharsha-san,

    Thank you for your quick reply.
    Your answer is very helpful.
    Thank you!!

    Best regards,
    Fumio Nakano