frame clock error in read DDR to file

praveen tu

Other Parts Discussed in Thread: AFE5809

I'm using TSW1400 EVM with AFE5809 EVM. While capturing data i'm getting an error like "frame clock error in read DDR to file". What could be the reason? Please reply.

over 11 years ago

0 jim s over 11 years ago

TI__Guru* 91947 points

praveen

What is the status of the 8 LED's when this occurs? This usually happens when the Data clock and or Frame clock are not sent to the TSW1400. Can you verify that these two signals are getting to the TSW1400 properly?

Regards,

Jim

0 praveen tu over 11 years ago in reply to jim s

Prodigy 195 points

Thanks for your guidance sir...The problem was rectified.

0 Sajad Rahmdel over 8 years ago in reply to praveen tu

Expert 1705 points

We are facing the same issue, I wish you have provided the solution.

0 Richard Prentice over 8 years ago in reply to Sajad Rahmdel

TI__Mastermind 29220 points

Hi,

Since you are replying to a posting regarding the AFE5809, and your previous posting was specifically in regards to AFE5809, I am moving this whole thread to the Medical forum where the AFE5809 is supported.

Regards,
Richard P.

Data converters

Data converters forum

frame clock error in read DDR to file