This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Linux/dra745: Hi, I have built YOCTO Linux image from PROCESSOR-SDK-LINUX-AUTOMOTIVE 03_04_00_03 and got all the images but when i am extracting the rootfs.tar.xz to sdcard i am getting the below errors please help me out to so

Part Number: DRA745

Tool/software: Linux

tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/mmap15: Cannot open: No such file or directory
./opt/ltp/testcases/bin/gensinh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/gensinh: Cannot open: No such file or directory
./opt/ltp/testcases/bin/msgctl02
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/msgctl02: Cannot open: No such file or directory
./opt/ltp/testcases/bin/creat06
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/creat06: Cannot open: No such file or directory
./opt/ltp/testcases/bin/tomoyo_filesystem_test
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/tomoyo_filesystem_test: Cannot open: No such file or directory
./opt/ltp/testcases/bin/setgid03
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/setgid03: Cannot open: No such file or directory
./opt/ltp/testcases/bin/tomoyo_file_test
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/tomoyo_file_test: Cannot open: No such file or directory
./opt/ltp/testcases/bin/time02
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/time02: Cannot open: No such file or directory
./opt/ltp/testcases/bin/hugeshmat05
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/hugeshmat05: Cannot open: No such file or directory
./opt/ltp/testcases/bin/hugeshmat01
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/hugeshmat01: Cannot open: No such file or directory
./opt/ltp/testcases/bin/lchown03_16
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/lchown03_16: Cannot open: No such file or directory
./opt/ltp/testcases/bin/data
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/data: Cannot open: No such file or directory
./opt/ltp/testcases/bin/ioctl02
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/ioctl02: Cannot open: No such file or directory
./opt/ltp/testcases/bin/semop02
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/semop02: Cannot open: No such file or directory
./opt/ltp/testcases/bin/sendfile06_64
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/sendfile06_64: Cannot open: No such file or directory
./opt/ltp/testcases/bin/mmapstress04
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/mmapstress04: Cannot open: No such file or directory
./opt/ltp/testcases/bin/smack_set_netlabel.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/smack_set_netlabel.sh: Cannot open: No such file or directory
./opt/ltp/testcases/bin/open07
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/open07: Cannot open: No such file or directory
./opt/ltp/testcases/bin/smack_file_access.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/smack_file_access.sh: Cannot open: No such file or directory
./opt/ltp/testcases/bin/genfabs
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/genfabs: Cannot open: No such file or directory
./opt/ltp/testcases/bin/nice03
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/nice03: Cannot open: No such file or directory
./opt/ltp/testcases/bin/timer_create02
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/timer_create02: Cannot open: No such file or directory
./opt/ltp/testcases/bin/semctl04
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/semctl04: Cannot open: No such file or directory
./opt/ltp/testcases/bin/chmod06
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/chmod06: Cannot open: No such file or directory
./opt/ltp/testcases/bin/hugemmap01
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/hugemmap01: Cannot open: No such file or directory
./opt/ltp/testcases/bin/execve02
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/execve02: Cannot open: No such file or directory
./opt/ltp/testcases/bin/futex_wake03
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/futex_wake03: Cannot open: No such file or directory
./opt/ltp/testcases/bin/setresgid03
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/setresgid03: Cannot open: No such file or directory
./opt/ltp/testcases/bin/setgroups04
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/setgroups04: Cannot open: No such file or directory
./opt/ltp/testcases/bin/setresgid02
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/setresgid02: Cannot open: No such file or directory
./opt/ltp/testcases/bin/mkdir02
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/mkdir02: Cannot open: No such file or directory
./opt/ltp/testcases/bin/flistxattr03
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/flistxattr03: Cannot open: No such file or directory
./opt/ltp/testcases/bin/mtest01
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/mtest01: Cannot open: No such file or directory
./opt/ltp/testcases/bin/swapon01
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/bin/swapon01: Cannot open: No such file or directory
./opt/ltp/testcases/data/
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/data: Cannot mkdir: No such file or directory
./opt/ltp/testcases/data/ima_policy/
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/data/ima_policy: Cannot mkdir: No such file or directory
./opt/ltp/testcases/data/ima_policy/measure.policy-invalid
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/data/ima_policy/measure.policy-invalid: Cannot open: No such file or directory
./opt/ltp/testcases/data/ima_policy/measure.policy
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testcases/data/ima_policy/measure.policy: Cannot open: No such file or directory
./opt/ltp/testscripts/
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts: Cannot mkdir: No such file or directory
./opt/ltp/testscripts/exportfs.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/exportfs.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/autofs4.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/autofs4.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/load_stress_all_kernel_modules.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/load_stress_all_kernel_modules.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/ltpstress.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/ltpstress.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/test_realtime.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/test_realtime.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/runEALtests.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/runEALtests.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/ltp-aiodio.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/ltp-aiodio.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/ltpfsnolvm.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/ltpfsnolvm.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/adp_test.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/adp_test.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/autofs1.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/autofs1.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/network.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/network.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/adp.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/adp.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/sysfs.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/sysfs.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/tpm_tools.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/tpm_tools.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/ltp-scsi_debug.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/ltp-scsi_debug.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/diskio.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/diskio.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/ltpfslvm.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/ltpfslvm.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/test_fs_bind.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/test_fs_bind.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/adp_children.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/adp_children.sh: Cannot open: No such file or directory
./opt/ltp/testscripts/ltpdmmapper.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/testscripts/ltpdmmapper.sh: Cannot open: No such file or directory
./opt/ltp/Version
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/Version: Cannot open: No such file or directory
./opt/ltp/bin/
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/bin: Cannot mkdir: No such file or directory
./opt/ltp/bin/create_valgrind_check.awk
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/bin/create_valgrind_check.awk: Cannot open: No such file or directory
./opt/ltp/bin/genhtml.pl
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/bin/genhtml.pl: Cannot open: No such file or directory
./opt/ltp/bin/create_dmesg_entries_for_each_test.awk
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/bin/create_dmesg_entries_for_each_test.awk: Cannot open: No such file or directory
./opt/ltp/bin/make-file.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/bin/make-file.sh: Cannot open: No such file or directory
./opt/ltp/bin/rand_lines
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/bin/rand_lines: Cannot open: No such file or directory
./opt/ltp/bin/ltp-bump
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/bin/ltp-bump: Cannot open: No such file or directory
./opt/ltp/bin/insert_kernel_faults.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/bin/insert_kernel_faults.sh: Cannot open: No such file or directory
./opt/ltp/bin/create_kernel_faults_in_loops_and_probability.awk
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/bin/create_kernel_faults_in_loops_and_probability.awk: Cannot open: No such file or directory
./opt/ltp/bin/restore_kernel_faults_default.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/bin/restore_kernel_faults_default.sh: Cannot open: No such file or directory
./opt/ltp/bin/ltp-scanner
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/bin/ltp-scanner: Cannot open: No such file or directory
./opt/ltp/bin/html_report_header.txt
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/bin/html_report_header.txt: Cannot open: No such file or directory
./opt/ltp/bin/ltp-pan
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/bin/ltp-pan: Cannot open: No such file or directory
./opt/ltp/IDcheck.sh
tar: ./opt: Cannot mkdir: Read-only file system
tar: ./opt/ltp/IDcheck.sh: Cannot open: No such file or directory
tar: ./usr/share/terminfo/v: Cannot stat: No such file or directory
tar: ./usr/share/terminfo/x: Cannot stat: No such file or directory
tar: ./usr/share/terminfo/l: Cannot stat: No such file or directory
tar: ./usr/share/terminfo/r: Cannot stat: No such file or directory
tar: ./usr/share/terminfo/s: Cannot stat: No such file or directory
tar: ./usr/share/terminfo/d: Cannot stat: No such file or directory
tar: ./usr/share/terminfo/a: Cannot stat: No such file or directory
tar: ./usr/share/terminfo: Cannot stat: No such file or directory
tar: ./usr/share: Cannot utime: Read-only file system
tar: ./usr/share: Cannot change ownership to uid 0, gid 0: Read-only file system
tar: ./usr/share: Cannot change mode to rwxr-xr-x: Read-only file system
tar: ./usr/arm-linux-gnueabi/bin: Cannot stat: No such file or directory
tar: ./usr/arm-linux-gnueabi: Cannot stat: No such file or directory
tar: ./usr: Cannot utime: Read-only file system
tar: ./usr: Cannot change ownership to uid 0, gid 0: Read-only file system
tar: ./usr: Cannot change mode to rwxr-xr-x: Read-only file system
tar: ./etc/rc3.d: Cannot stat: No such file or directory
tar: ./etc/rc1.d: Cannot stat: No such file or directory
tar: ./etc/rc5.d: Cannot stat: No such file or directory
tar: ./etc/init.d: Cannot stat: No such file or directory
tar: ./etc/rc2.d: Cannot stat: No such file or directory
tar: ./etc/fonts/conf.d: Cannot stat: No such file or directory
tar: ./etc/fonts: Cannot stat: No such file or directory
tar: ./etc/rc4.d: Cannot stat: No such file or directory
tar: ./etc/rcS.d: Cannot stat: No such file or directory
tar: ./etc/network/if-post-down.d: Cannot stat: No such file or directory
tar: ./etc/network: Cannot stat: No such file or directory
tar: ./etc/rc0.d: Cannot stat: No such file or directory
tar: ./etc/ssl/certs: Cannot stat: No such file or directory
tar: ./etc/ssl: Cannot stat: No such file or directory
tar: ./etc/sysctl.d: Cannot stat: No such file or directory
tar: ./etc/xdg/systemd: Cannot stat: No such file or directory
tar: ./etc/xdg: Cannot stat: No such file or directory
tar: ./etc/systemd/system/sysinit.target.wants: Cannot stat: No such file or directory
tar: ./etc/systemd/system/basic.target.wants: Cannot stat: No such file or directory
tar: ./etc/systemd/system/systemd-random-seed.service.wants: Cannot stat: No such file or directory
tar: ./etc/systemd/system/local-fs.target.wants: Cannot stat: No such file or directory
tar: ./etc/systemd/system/sockets.target.wants: Cannot stat: No such file or directory
tar: ./etc/systemd/system/bluetooth.target.wants: Cannot stat: No such file or directory
tar: ./etc/systemd/system/network-online.target.wants: Cannot stat: No such file or directory
tar: ./etc/systemd/system/multi-user.target.wants: Cannot stat: No such file or directory
tar: ./etc/systemd/system/getty.target.wants: Cannot stat: No such file or directory
tar: ./etc/systemd/system: Cannot stat: No such file or directory
tar: ./etc/systemd: Cannot stat: No such file or directory
tar: ./etc/rc6.d: Cannot stat: No such file or directory
tar: ./etc: Cannot stat: No such file or directory
tar: .: Cannot utime: Read-only file system
tar: .: Cannot change ownership to uid 0, gid 0: Read-only file system
tar: .: Cannot change mode to rwxr-xr-x: Read-only file system
tar: Exiting with failure status due to previous errors

  • Hi Deepthi,

    do you use 'mksdboot.sh' script? Did you run it with 'sudo'?
    Also is your SD card at least 4GB?

    Thanks,
    Yordan
  • Hi Yordan,


    I tried with mksdboot.sh with sudo but i am getting the same error.

    sudo ${INSTALL_DIR}/bin/mksdboot.sh --device /dev/sdb --sdk ${INSTALL_DIR}

    I am attaching the bootlog from the board.

    7658.bootlog on board.txt
    U-Boot SPL 2016.05-g333293e877 (Dec 28 2017 - 05:17:21)
    DRA752-GP ES2.0
    no pinctrl for hs200_1_8v
    no pinctrl for ddr_1_8v
    ** First descriptor is NOT a primary desc on 1:1 **
    *** Warning - bad CRC, using default environment
    
    Trying to boot from MMC1
    *** Warning - bad CRC, using default environment
    
    reading u-boot.img
    reading u-boot.img
    reading u-boot.img
    reading u-boot.img
    
    
    U-Boot 2016.05-g333293e877 (Dec 28 2017 - 05:17:21 +0530)
    
    CPU  : DRA752-GP ES2.0
    Model: TI DRA742
    Board: DRA74x EVM REV H.0
    DRAM:  4 GiB
    MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
    ** First descriptor is NOT a primary desc on 1:1 **
    *** Warning - bad CRC, using default environment
    
    GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
    part_get_info_efi: *** ERROR: Invalid GPT ***
    GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
    part_get_info_efi: *** ERROR: Invalid Backup GPT ***
    ERROR: cannot find partition: 'userdata'
    
    at arch/arm/cpu/armv7/omap-common/utils.c:199/mmc_get_part_size()
    Warning: fastboot.userdata_size: unable to calc
    SCSI:  SATA link 0 timeout.
    AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
    flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst 
    scanning bus for devices...
    Found 0 device(s).
    Net:   
    Warning: ethernet@48484000 using MAC address from ROM
    eth0: ethernet@48484000
    Hit any key to stop autoboot:  0 
    switch to partitions #0, OK
    mmc0 is current device
    SD/MMC found on device 0
    reading boot.scr
    ** Unable to read file boot.scr **
    reading uEnv.txt
    234 bytes read in 2 ms (114.3 KiB/s)
    Loaded env from uEnv.txt
    Importing environment from mmc0 ...
    switch to partitions #0, OK
    mmc0 is current device
    SD/MMC found on device 0
    3553072 bytes read in 209 ms (16.2 MiB/s)
    108307 bytes read in 34 ms (3 MiB/s)
    Booting from mmc0 ...
    Kernel image @ 0x82000000 [ 0x000000 - 0x363730 ]
    ## Flattened Device Tree blob at 88000000
       Booting using the fdt blob at 0x88000000
       Loading Device Tree to 8ffe2000, end 8ffff712 ... OK
    
    Starting kernel ...
    
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 4.4.84-g742f84423d (tiiappadmin@swubn03) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP7
    [    0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
    [    0.000000] Machine model: TI DRA742
    [    0.000000] bootconsole [earlycon0] enabled
    [    0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB
    [    0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool
    [    0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB
    [    0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool
    [    0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB
    [    0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool
    [    0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB
    [    0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool
    [    0.000000] cma: Reserved 128 MiB at 0x00000000b0000000
    [    0.000000] Forcing write-allocate cache policy for SMP
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] OMAP4: Map 0x000000027fd00000 to fe600000 for dram barrier
    [    0.000000] DRA752 ES2.0
    [    0.000000] PERCPU: Embedded 11 pages/cpu @eb726000 s14912 r8192 d21952 u45056
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1040704
    [    0.000000] Kernel command line: console=ttyO0,115200n8 elevator=noop root=PARTUUID=3f04b034-02 rw rootwait earlyprintk fixrtc o1
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Memory: 3826320K/4169728K available (6615K kernel code, 319K rwdata, 2456K rodata, 340K init, 290K bss, 48496K reser)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    [    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc08e402c   (9073 kB)
    [    0.000000]       .init : 0xc08e5000 - 0xc093a000   ( 340 kB)
    [    0.000000]       .data : 0xc093a000 - 0xc0989ee0   ( 320 kB)
    [    0.000000]        .bss : 0xc098b000 - 0xc09d3800   ( 290 kB)
    [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [    0.000000] Preemptible hierarchical RCU implementation.
    [    0.000000]  Build-time adjustment of leaf fanout to 32.
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div
    [    0.000000] OMAP clockevent source: timer1 at 32786 Hz
    [    0.000000] Architected cp15 timer(s) running at 6.14MHz (phys).
    [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns
    [    0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns
    [    0.008306] Switching to timer-based delay loop, resolution 162ns
    [    0.014956] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
    [    0.025217] OMAP clocksource: 32k_counter at 32768 Hz
    [    0.030960] Console: colour dummy device 80x30
    [    0.035616] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
    [    0.042410] This ensures that you still see kernel messages. Please
    [    0.048927] update your kernel commandline.
    [    0.053320] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475)
    [    0.063954] pid_max: default: 32768 minimum: 301
    [    0.068872] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.075759] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.083622] Initializing cgroup subsys io
    [    0.087844] Initializing cgroup subsys memory
    [    0.092417] Initializing cgroup subsys devices
    [    0.097066] Initializing cgroup subsys freezer
    [    0.101725] Initializing cgroup subsys perf_event
    [    0.106641] Initializing cgroup subsys pids
    [    0.111038] CPU: Testing write buffer coherency: ok
    [    0.116331] /cpus/cpu@0 missing clock-frequency property
    [    0.121877] /cpus/cpu@1 missing clock-frequency property
    [    0.127431] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.133357] Setting up static identity map for 0x80008380 - 0x800083e0
    [    0.220441] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.220511] Brought up 2 CPUs
    [    0.229531] SMP: Total of 2 processors activated (24.59 BogoMIPS).
    [    0.235968] CPU: All CPU(s) started in HYP mode.
    [    0.240789] CPU: Virtualization extensions available.
    [    0.246443] devtmpfs: initialized
    [    0.279284] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
    [    0.288200] omap_hwmod: l3_main_2 using broken dt data from ocp
    [    0.499772] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    [    0.509969] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.522432] pinctrl core: initialized pinctrl subsystem
    [    0.528747] NET: Registered protocol family 16
    [    0.534396] DMA: preallocated 256 KiB pool for atomic coherent allocations
    [    0.563482] cpuidle: using governor ladder
    [    0.593508] cpuidle: using governor menu
    [    0.606518] OMAP GPIO hardware version 0.1
    [    0.614979] GPIO line 161 (radio_rst) hogged as output/low
    [    0.623062] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 !
    [    0.648317] omap-gpmc 50000000.gpmc: GPMC revision 6.0
    [    0.653697] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
    [    0.672056] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
    [    0.680373] hw-breakpoint: maximum watchpoint size is 8 bytes.
    [    0.686910] omap4_sram_init:Unable to allocate sram needed to handle errata I688
    [    0.694603] omap4_sram_init:Unable to get sram pool needed to handle errata I688
    [    0.702854] OMAP DMA hardware revision 0.0
    [    0.748496] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)
    [    0.759467] edma 43300000.edma: memcpy is disabled
    [    0.769190] edma 43300000.edma: TI EDMA DMA engine driver
    [    0.779425] omap-iommu 40d01000.mmu: 40d01000.mmu registered
    [    0.785488] omap-iommu 40d02000.mmu: 40d02000.mmu registered
    [    0.791550] omap-iommu 58882000.mmu: 58882000.mmu registered
    [    0.797592] omap-iommu 55082000.mmu: 55082000.mmu registered
    [    0.803795] omap-iommu 41501000.mmu: 41501000.mmu registered
    [    0.809873] omap-iommu 41502000.mmu: 41502000.mmu registered
    [    0.819026] palmas 0-0058: IRQ missing: skipping irq request
    [    0.836138] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0
    [    0.908334] pcf857x 0-0020: probed
    [    0.912469] pcf857x 0-0021: probed
    [    0.916211] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
    [    0.936332] GPIO line 463 (vin6_sel_s0) hogged as output/low
    [    0.942314] pcf857x 1-0026: probed
    [    0.946498] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz
    [    0.952675] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz
    [    0.978730] pcf857x 3-0021: probed
    [    0.982323] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz
    [    0.988341] media: Linux media interface: v0.10
    [    0.993137] Linux video capture interface: v2.00
    [    0.997993] pps_core: LinuxPPS API ver. 1 registered
    [    1.003187] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [    1.012661] PTP clock support registered
    [    1.016823] EDAC MC: Ver: 3.0.0
    [    1.020905] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400
    [    1.027551] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400
    [    1.034253] Advanced Linux Sound Architecture Driver Initialized.
    [    1.041486] clocksource: Switched to clocksource arch_sys_counter
    [    1.058466] NET: Registered protocol family 2
    [    1.063534] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [    1.070907] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [    1.077740] TCP: Hash tables configured (established 8192 bind 8192)
    [    1.084402] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    1.090584] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    1.097406] NET: Registered protocol family 1
    [    1.102229] RPC: Registered named UNIX socket transport module.
    [    1.108391] RPC: Registered udp transport module.
    [    1.113319] RPC: Registered tcp transport module.
    [    1.118230] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    1.126017] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
    [    1.144577] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    1.151287] NFS: Registering the id_resolver key type
    [    1.156643] Key type id_resolver registered
    [    1.161021] Key type id_legacy registered
    [    1.165306] ntfs: driver 2.1.32 [Flags: R/O].
    [    1.171205] bounce: pool size: 64 pages
    [    1.175408] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
    [    1.183127] io scheduler noop registered (default)
    [    1.188131] io scheduler deadline registered
    [    1.192658] io scheduler cfq registered
    [    1.201639] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128
    [    1.212333] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges:
    [    1.218499]   No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff]
    [    1.226503]    IO 0x20003000..0x20012fff -> 0x00000000
    [    1.231886]   MEM 0x20013000..0x2fffffff -> 0x20013000
    [    1.270171] dra7-pcie 51000000.pcie_rc: link is not up
    [    1.275703] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00
    [    1.282509] pci_bus 0000:00: root bus resource [bus 00-ff]
    [    1.288227] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
    [    1.294679] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff]
    [    1.302235] PCI: bus0: Fast back to back transfers disabled
    [    1.308152] PCI: bus1: Fast back to back transfers enabled
    [    1.313961] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff]
    [    1.321021] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff]
    [    1.328095] pci 0000:00:00.0: PCI bridge to [bus 01]
    [    1.333506] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
    [    1.402459] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
    [    1.412528] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250
    [    1.421745] console [ttyS0] enabled
    [    1.421745] console [ttyS0] enabled
    [    1.428906] bootconsole [earlycon0] disabled
    [    1.428906] bootconsole [earlycon0] disabled
    [    1.438581] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 302, base_baud = 3000000) is a 8250
    [    1.448292] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 303, base_baud = 3000000) is a 8250
    [    1.458414] [drm] Initialized drm 1.1.0 20060810
    [    1.465159] OMAP DSS rev 6.1
    [    1.468903] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops)
    [    1.477388] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops)
    [    1.487282] connector-hdmi connector@1: failed to find video source
    [    1.499967] loop: module loaded
    [    1.504150] nand: No NAND device found
    [    1.507921] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch
    [    1.517886] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes)
    [    1.523303] 7 ofpart partitions found on MTD device spi32766.0
    [    1.529162] Creating 7 MTD partitions on "spi32766.0":
    [    1.534341] 0x000000000000-0x000000040000 : "QSPI.SPL"
    [    1.540402] 0x000000040000-0x000000140000 : "QSPI.u-boot"
    [    1.546727] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os"
    [    1.553659] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env"
    [    1.560296] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1"
    [    1.567671] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel"
    [    1.573987] 0x0000009e0000-0x000002000000 : "QSPI.file-system"
    [    1.581711] libphy: Fixed MDIO Bus: probed
    [    1.631519] davinci_mdio 48485000.mdio: davinci mdio revision 1.6
    [    1.637644] davinci_mdio 48485000.mdio: detected phy mask fffffff3
    [    1.647853] libphy: 48485000.mdio: probed
    [    1.651923] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown
    [    1.659966] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver unknown
    [    1.668698] cpsw 48484000.ethernet: Detected MACID = fc:0f:4b:b0:0d:c0
    [    1.675395] cpsw 48484000.ethernet: cpts: overflow check period 800
    [    1.682394] cpsw 48484000.ethernet: cpsw: Detected MACID = fc:0f:4b:b0:0d:c1
    [    1.691068] mousedev: PS/2 mouse device common for all mice
    [    1.697383] i2c /dev entries driver
    [    1.703020] tvp5158 1-0058: Camera sensor driver registered
    [    1.708950] ov1063x 1-0037: Failed writing register 0x0103!
    [    1.714601] ov1063x: probe of 1-0037 failed with error -121
    [    1.720970] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin
    [    1.728068] vip 48970000.vip: loading firmware vpdma-1b8.bin
    [    1.738498] omap_hsmmc 4809c000.mmc: Got CD GPIO
    [    1.743221] vpe 489d0000.vpe: Device registered as /dev/video0
    [    1.749888] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode
    [    1.751512] vip 48970000.vip: VPDMA firmware loaded
    [    1.751647] vip1-s0: Port A: Using subdev tvp5158 1-0058 for capture
    [    1.756381] vip1-s0: device registered as video1
    [    1.756540] vip1-s0: device registered as video2
    [    1.756694] vip1-s0: device registered as video3
    [    1.756839] vip1-s0: device registered as video4
    [    1.786149] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode
    [    1.792689] evm_3v3_sw: supplied by sysen1
    [    1.875282] mmc0: MAN_BKOPS_EN bit is not set
    [    1.887156] mmc0: new HS200 MMC card at address 0001
    [    1.892613] mmcblk0: mmc0:0001 MMC08G 7.25 GiB 
    [    1.897399] mmcblk0boot0: mmc0:0001 MMC08G partition 1 8.00 MiB
    [    1.903579] mmcblk0boot1: mmc0:0001 MMC08G partition 2 8.00 MiB
    [    1.953346] ledtrig-cpu: registered to indicate activity on CPUs
    [    1.964542] hwspinlock_user gatemp: requested 20 hwspinlocks
    [    1.971528] aic_dvdd: supplied by evm_3v3_sw
    [    1.978293] davinci-mcasp 48464000.mcasp: DAI is shared
    [    1.984425] davinci-mcasp 48474000.mcasp: DAI is shared
    [    1.989876] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0
    [    1.996992] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok
    [    2.007944] NET: Registered protocol family 10
    [    2.023261] sit: IPv6 over IPv4 tunneling driver
    [    2.028450] NET: Registered protocol family 17
    [    2.033201] Key type dns_resolver registered
    [    2.037643] omap_voltage_late_init: Voltage driver support not added
    [    2.044555] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm
    [    2.050765] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm
    [    2.057511] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm
    [    2.063748] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm
    [    2.071917] Power Management for TI OMAP4+ devices.
    [    2.077019] Registering SWP/SWPB emulation handler
    [    2.082809] dmm 4e000000.dmm: workaround for errata i878 in use
    [    2.090021] dmm 4e000000.dmm: initialized all PAT entries
    [    2.107557] omap_hsmmc 4809c000.mmc: Got CD GPIO
    [    2.152742] asoc-simple-card sound0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok
    [    2.172791] asoc-simple-card jamr3_sound: tlv320aic3x-hifi <-> 48474000.mcasp mapping ok
    [    2.204170] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [    2.210812] [drm] No driver support for vblank timestamp query.
    [    2.216801] omapdrm omapdrm.0: No connectors reported connected with modes
    [    2.223737] [drm] Cannot find any crtc or sizes - going 1024x768
    [    2.232954] [drm] Enabling DMM ywrap scrolling
    [    2.241789] Console: switching to colour frame buffer device 128x48
    [    2.251810] omapdrm omapdrm.0: fb0: omapdrm frame buffer device
    [    2.253567] omap_hsmmc 4809c000.mmc: card busy
    [    2.292257] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0
    [    2.299036] input: gpio_keys as /devices/platform/gpio_keys/input/input0
    [    2.306941] hctosys: unable to open rtc device (rtc0)
    [    2.322269] evm_1v8: disabling
    [    2.325341] aic_dvdd: disabling
    [    2.328491] vmmcwl_fixed: disabling
    [    2.332207] ldousb: disabling
    [    2.335611] ALSA device list:
    [    2.338589]   #0: DRA7xx-EVM
    [    2.341628]   #1: HDMI 58040000.encoder
    [    2.345495]   #2: DRA7xx-JAMR3
    [    2.349602] Waiting for root device PARTUUID=3f04b034-02...
    [    2.373578] omap_hsmmc 4809c000.mmc: card busy
    [    2.503570] omap_hsmmc 4809c000.mmc: card busy
    [    2.633575] omap_hsmmc 4809c000.mmc: card busy
    [    2.763591] omap_hsmmc 4809c000.mmc: card busy
    [    2.893572] omap_hsmmc 4809c000.mmc: card busy
    [    3.023582] omap_hsmmc 4809c000.mmc: card busy
    [    3.153591] omap_hsmmc 4809c000.mmc: card busy
    [    3.283586] omap_hsmmc 4809c000.mmc: card busy
    [    3.413587] omap_hsmmc 4809c000.mmc: card busy
    [    3.461501] mmc2: Skipping voltage switch
    [    3.528651] mmc2: host does not support reading read-only switch, assuming write-enable
    [    3.538651] mmc2: new high speed SDHC card at address 0007
    [    3.554677] mmcblk1: mmc2:0007 SS08G 7.21 GiB 
    [    3.560258]  mmcblk1: p1 p2
    [    3.706150] EXT4-fs (mmcblk1p2): recovery complete
    [    3.710973] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
    [    3.719157] VFS: Mounted root (ext4 filesystem) on device 179:50.
    [    3.726106] devtmpfs: error mounting -2
    [    3.730166] Freeing unused kernel memory: 340K
    [    3.735543] This architecture does not have kernel memory protection.
    [    3.761626] Starting init: /bin/sh exists but couldn't execute it (error -13)
    [    3.768794] Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/init.
    [    3.781979] CPU0: stopping
    [    3.784704] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.84-g742f84423d #1
    [    3.791696] Hardware name: Generic DRA74X (Flattened Device Tree)
    [    3.797814] Backtrace: 
    [    3.800293] [<c00131d4>] (dump_backtrace) from [<c00133d0>] (show_stack+0x18/0x1c)
    [    3.807893]  r7:c093bef0 r6:20000193 r5:00000000 r4:c0959810
    [    3.813620] [<c00133b8>] (show_stack) from [<c02b21a8>] (dump_stack+0x8c/0xa0)
    [    3.820879] [<c02b211c>] (dump_stack) from [<c0016520>] (handle_IPI+0x184/0x198)
    [    3.828304]  r7:c093bef0 r6:00000000 r5:00000000 r4:c0936424
    [    3.834026] [<c001639c>] (handle_IPI) from [<c00094c4>] (gic_handle_irq+0x78/0x7c)
    [    3.841625]  r7:fa212000 r6:c093bef0 r5:fa21200c r4:c093c8ec
    [    3.847345] [<c000944c>] (gic_handle_irq) from [<c0013ec0>] (__irq_svc+0x40/0x74)
    [    3.854859] Exception stack(0xc093bef0 to 0xc093bf38)
    [    3.859932] bee0:                                     00000001 00000000 fe600000 00000000
    [    3.868145] bf00: c093a000 c093c4ac 00000000 00000000 c093bf60 c0680274 c093c50c c093bf4c
    [    3.876358] bf20: c093bf2c c093bf40 c0027fec c0010600 60000013 ffffffff
    [    3.882997]  r9:c0680274 r8:c093bf60 r7:c093bf24 r6:ffffffff r5:60000013 r4:c0010600
    [    3.890825] [<c00105d8>] (arch_cpu_idle) from [<c0071468>] (default_idle_call+0x28/0x34)
    [    3.898957] [<c0071440>] (default_idle_call) from [<c00716c8>] (cpu_startup_entry+0x200/0x260)
    [    3.907614] [<c00714c8>] (cpu_startup_entry) from [<c0677544>] (rest_init+0x90/0x94)
    [    3.915387]  r7:00000000
    [    3.917944] [<c06774b4>] (rest_init) from [<c08e5d88>] (start_kernel+0x400/0x40c)
    [    3.925455]  r5:c098b000 r4:c098b040
    [    3.929064] [<c08e5988>] (start_kernel) from [<80008090>] (0x80008090)
    [    3.935628] ---[ end Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documenta.
    
    
    

    I am using 8GB sdcard.

    Thank you,

    Deepthi

  • Hi Deepthi,

    I have pinged an Yocto expert to help with that.

    Regards,
    Yordan
  • Hi Deepthi,

    Let us trace back the sequence of actions and understand the errors further. Unless you can prepare the card correctly, you cannot expect it to boot on the target.

    Could you please answer the following questions?

    a. Which version of Ubuntu are you using? Execute command "lsb_release -a"
    b. Share the path of the PSDKLA 3.04 installation on your PC.
    c. What are the sequence of steps that you did after the installation?
    d. After you insert the 8GB card, please execute "sudo fdisk -l" and "ls -al /media/$USER/"
    e. Do you have any special udev commands to mount the card differently.

    It is better to do all of these steps in a single console and share the output as an attachment.

    Regards
    Karthik
  • Hi Karthik,

    Thanks for the support.

    I am attaching the out put log with the commands which you mentioned in the post. If you want any other details please let me know.


    2625.log.txt
      a     user@EESBLRP116:~$ lsb_release -a
    	No LSB modules are available.
    	Distributor ID:	Ubuntu
    	Description:	Ubuntu 14.04.3 LTS
    	Release:	14.04
    	Codename:	trusty
    
      b,c	user@EESBLRP116:~/ti-processor-sdk-linux-automotive-dra7xx-evm-03_04_00_03/yocto-layers$ ./build-core-sdk.sh dra7xx-evm
    	[PSDKLA]>
    	[PSDKLA]> Current Directory is /home/user/ti-processor-sdk-linux-automotive-dra7xx-evm-03_04_00_03/yocto-layers
    	[PSDKLA]> PATH is /home/user/ti-processor-sdk-linux-automotive-dra7xx-evm-03_04_00_03/gcc-linaro-5.3-2016.02-x86_64_arm-linux-gnueabihf/bin:/home/user/ti-processor-sdk-linux-automotive-dra7xx-evm-03_04_00_03/gcc-linaro-5.3-2016.02-x86_64_arm-linux-gnueabihf/bin:/home/user/ti-processor-sdk-linux-automotive-dra7xx-evm-03_04_00_03/gcc-linaro-5.3-2016.02-x86_64_arm-linux-gnueabihf/bin:/home/user/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games
    	[PSDKLA]> Building on EESBLRP116 running Linux EESBLRP116 3.19.0-25-generic #26~14.04.1-Ubuntu SMP Fri Jul 24 21:16:20 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
    	[PSDKLA]> Starting Yocto build at Fri Mar 16 18:24:18 PST 2018
    	[PSDKLA]>
    	[PSDKLA]> cd build
    	[PSDKLA]> . conf/setenv
    	[PSDKLA]> cp conf/local.conf conf/local.conf.pristine
    	[PSDKLA]> MACHINE=dra7xx-evm bitbake tisdk-rootfs-image 
    	NOTE: Started PRServer with DBfile: /home/user/ti-processor-sdk-linux-automotive-dra7xx-evm-03_04_00_03/yocto-layers/build/cache/prserv.sqlite3, IP: 127.0.0.1, PORT: 39344, PID: 7688
    	Loading cache: 100% |###############################################################################################| ETA:  00:00:00
    	Loaded 2849 entries from dependency cache.
    	NOTE: Resolving any missing task queue dependencies
    
    	Build Configuration:
    	BB_VERSION        = "1.30.0"
    	BUILD_SYS         = "x86_64-linux"
    	NATIVELSBSTRING   = "Ubuntu-14.04"
    	TARGET_SYS        = "arm-linux-gnueabi"
    	MACHINE           = "dra7xx-evm"
    	DISTRO            = "arago"
    	DISTRO_VERSION    = "2016.12"
    	TUNE_FEATURES     = "arm armv7a vfp thumb neon       callconvention-hard"
    	TARGET_FPU        = "hard"
    	meta-glsdk        = "HEAD:66cfd8ef55344508d6e7b306259f34c05b828194"
    	meta-arago-distro 
    	meta-arago-extras = "HEAD:4c01410ffde8853224567fb6078d7d9f190b942f"
    	meta-qt5          = "HEAD:f8584d7a7c90afc71484a40279aa3df651d0e04f"
    	meta-networking   
    	meta-ruby         
    	meta-python       
    	meta-oe           = "HEAD:55c8a76da5dc099a7bc3838495c672140cedb78e"
    	meta-ti           = "HEAD:5f3a1169d307fec41626f850f5c700437dedbe93"
    	meta-linaro-toolchain 
    	meta-optee        = "HEAD:2f51d38048599d9878f149d6d15539fb97603f8f"
    	meta              = "HEAD:bfa04fa71c47e8fe9528208848cfcec2e232777d"
    
    	NOTE: Preparing RunQueue
    	NOTE: Executing SetScene Tasks
    	NOTE: Executing RunQueue Tasks
    	NOTE: Tasks Summary: Attempted 7428 tasks of which 7428 didn't need to be rerun and all succeeded.
    	NOTE: Writing buildhistory
    	[PSDKLA]>
    	[PSDKLA]> Completed Yocto build at Fri Mar 16 18:24:58 PST 2018
    	[PSDKLA]>
    
    
    
    d	user@EESBLRP116:~$ sudo fdisk -l
    
    	Disk /dev/sda: 500.1 GB, 500107862016 bytes
    	255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
    	Units = sectors of 1 * 512 = 512 bytes
    	Sector size (logical/physical): 512 bytes / 512 bytes
    	I/O size (minimum/optimal): 512 bytes / 512 bytes
    	Disk identifier: 0x52e54df1
    
    	   Device Boot      Start         End      Blocks   Id  System
    	/dev/sda1   *        2048     1023999      510976    7  HPFS/NTFS/exFAT
    	/dev/sda2         1024000   162183167    80579584    7  HPFS/NTFS/exFAT
    	/dev/sda3       162185214   976771071   407292929    5  Extended
    	/dev/sda5       162185216   163940351      877568   83  Linux
    	/dev/sda6       163942400   179941375     7999488   82  Linux swap / Solaris
    	/dev/sda7       179943424   976771071   398413824   83  Linux
    
    	Disk /dev/sdc: 7744 MB, 7744782336 bytes
    	239 heads, 62 sectors/track, 1020 cylinders, total 15126528 sectors
    	Units = sectors of 1 * 512 = 512 bytes
    	Sector size (logical/physical): 512 bytes / 512 bytes
    	I/O size (minimum/optimal): 512 bytes / 512 bytes
    	Disk identifier: 0x3f04b034
    
    	   Device Boot      Start         End      Blocks   Id  System
    	/dev/sdc1   *        2048      129023       63488    c  W95 FAT32 (LBA)
    	/dev/sdc2          129024    15126527     7498752   83  Linux
    
    	user@EESBLRP116:~$ ls -al /media/$USER/
    	total 16
    	drwxr-x---+ 3 root root 4096 Mar 15 18:52 .
    	drwxr-xr-x  3 root root 4096 Jun 28  2017 ..
    	drwx------  1 user user 8192 Mar  9 18:34 Windows
    
    e      No udev commands
    
    

    Thank you,

    Deepthi

  • Hi Deepthi,

    Thanks for providing the logs..
    It seems like your card is not mounting correctly.

    Can you please do the following?
    a. Plug in the 8GB card into the Ubuntu 14.04 PC.
    b. sudo fdisk -l
    c. Run the mksdboot.sh command as mentioned in the software developers guide.

    Please send the console logs of this entire sequence.

    Regards
    Karthik
  • 4062.log.txt
    user@EESBLRP116:~/ti-processor-sdk-linux-automotive-dra7xx-evm-03_04_00_03$ sudo fdisk -l
    
    Disk /dev/sda: 500.1 GB, 500107862016 bytes
    255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x52e54df1
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *        2048     1023999      510976    7  HPFS/NTFS/exFAT
    /dev/sda2         1024000   162183167    80579584    7  HPFS/NTFS/exFAT
    /dev/sda3       162185214   976771071   407292929    5  Extended
    /dev/sda5       162185216   163940351      877568   83  Linux
    /dev/sda6       163942400   179941375     7999488   82  Linux swap / Solaris
    /dev/sda7       179943424   976771071   398413824   83  Linux
    
    Disk /dev/sdf: 7744 MB, 7744782336 bytes
    239 heads, 62 sectors/track, 1020 cylinders, total 15126528 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0xc1065e16
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdf1   *        2048      129023       63488    c  W95 FAT32 (LBA)
    /dev/sdf2          129024    15126527     7498752   83  Linux
    
    user@EESBLRP116:~/ti-processor-sdk-linux-automotive-dra7xx-evm-03_04_00_03$ sudo ${INSTALL_DIR}/bin/mksdboot.sh --device /dev/sdf sdk ${INSTALL_DIR}  
    -- Main device is: /dev/sda7
    ************************************************************
    *         THIS WILL DELETE ALL THE DATA ON /dev/sdd        *
    *                                                          *
    *         WARNING! Make sure your computer does not go     *
    *                  in to idle mode while this script is    *
    *                  running. The script will complete,      *
    *                  but your SD card may be corrupted.      *
    *                                                          *
    *         Press <ENTER> to confirm....                     *
    ************************************************************
    
    unmounting device '/dev/sdf1'
    unmounting device '/dev/sdf2'
    1024+0 records in
    1024+0 records out
    1048576 bytes (1.0 MB) copied, 0.391311 s, 2.7 MB/s
    Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
    Building a new DOS disklabel with disk identifier 0x14183c7a.
    Changes will remain in memory only, until you decide to write them.
    After that, of course, the previous content won't be recoverable.
    
    Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
    
    Command (m for help): Partition type:
       p   primary (0 primary, 0 extended, 4 free)
       e   extended
    Select (default p): Partition number (1-4, default 1): First sector (2048-15126527, default 2048): Using default value 2048
    Last sector, +sectors or +size{K,M,G} (2048-15126527, default 15126527): 
    Command (m for help): Partition type:
       p   primary (1 primary, 0 extended, 3 free)
       e   extended
    Select (default p): Partition number (1-4, default 2): First sector (129024-15126527, default 129024): Using default value 129024
    Last sector, +sectors or +size{K,M,G} (129024-15126527, default 15126527): Using default value 15126527
    
    Command (m for help): Partition number (1-4): Hex code (type L to list codes): Changed system type of partition 1 to c (W95 FAT32 (LBA))
    
    Command (m for help): Partition number (1-4): 
    Command (m for help): The partition table has been altered!
    
    Calling ioctl() to re-read partition table.
    
    WARNING: If you have created or modified any DOS 6.x
    partitions, please see the fdisk manual page for additional
    information.
    Syncing disks.
    Formating /dev/sdf1 ...
    mkfs.fat 3.0.26 (2014-03-07)
    mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows
    mke2fs 1.42.9 (4-Feb-2014)
    Filesystem label=rootfs
    OS type: Linux
    Block size=4096 (log=2)
    Fragment size=4096 (log=2)
    Stride=0 blocks, Stripe width=0 blocks
    469568 inodes, 1874688 blocks
    93734 blocks (5.00%) reserved for the super user
    First data block=0
    Maximum filesystem blocks=1920991232
    58 block groups
    32768 blocks per group, 32768 fragments per group
    8096 inodes per group
    Superblock backups stored on blocks: 
    	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
    
    Allocating group tables: done                            
    Writing inode tables: done                            
    Creating journal (32768 blocks): done
    Writing superblocks and filesystem accounting information: done 
    
    Copying filesystem on /dev/sdf1,/dev/sdf2
    Extracting filesystem on /dev/sdf2 ...
    
    
    
    tar: ./opt/ltp/runtest/ddt/alsa_performance: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/nand_modular_stress_dd_rw_jffs2: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/nand_mtd_flash_erase: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/v4l2_disp_modular: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/powermgr_dyn_tcks: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/qspi_perf_jffs2: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/nand_modular_dd_rw_ubifs: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/nand_perf_ubifs_w_cpuload: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/nand_check_mtd_proc_entry: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/powermgr_suspend_alsa: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/multi_display_audio: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/sata_modular_dd_rw_ext2: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/spi_mtd_debug_erase: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/alsa_opmode: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/gpio-clk-check: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/sata_modular_dd_rw_vfat: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/pci_msi_sata_perf: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/usbhost_hid_keyboard: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/usbhost_perf_superspeed: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/memtest: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/rtc_alarm_mcp: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/usbhost_video: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/crypto_openssl_multi_threaded_des_cbc: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/realtime_ipc_load: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/powermgr_standby_emmc: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/nor_mtd_debug_erase: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/thermal_sensing: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/mmc_sdhccard_mmc_to_mmc_cp: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/system_stressng: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/i2c_irq: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/vlan_switch_ping: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/pci_eth_ping: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/nand_stress_dd_rw_jffs2: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/pci_wifi_ping: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/v4l2_disp_perf: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/smp_cpu_affinity: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/system_mmc_smp_priority_processing: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/qspi_raw_write: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/eth_modular_cpsw_descriptors: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/nor_modular_stress_dd_rw_jffs2: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/emmc_dd_rw_vfat: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/mmc_sdhccard_modular_dd_rw_vfat: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/realtime_pci_load-smp: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/powermgr_suspend_graphics: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/mmc_check_speed_uhsddr50: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/emmc_perf_ext4: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/system_gst_cpufreq: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/powermgr_suspend_pci: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/spi_perf_jffs2: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/alsa_samplerate: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/eth_parallel_processing: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/usbhost_modular_multi_insmod_rmmod: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/powermgr_suspend_nand: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/alsa_periodsize: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/usbhost_msc_copy: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/thermal_cpufreqcooling: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/TEMPLATE: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/realtime_stress_load: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/nor_mtd_flash_eraseall: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/nor_modular_dd_rw_jffs2: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/spi_mtd_debug_rw: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/spi_raw_write: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/realtime_graphics_load: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/usb_stress_io: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/system_multimedia: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/crypto_openssl_multi_threaded_3des: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/gpio-leds: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/pwm_backlight: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/mmc_dd_rw_neg: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/mmc_mmccard_dd_rw_ext2: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/realtime_hackbench: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/gc320: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/usbhost_hid_mouse: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/nand_modular_neg_rmmod_when_mount_ubifs: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/usb3host_perf_vfat: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/mmc_parallel_processing: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/nor_mtd_flash_erase: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/qspi_mtd_mkdir_rmdir: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/v4l2_disp_davinci: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/smp_irq_affinity: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/realtime_mem_load: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/powermgr_standby_pci: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/powermgr_suspend_sata: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/realtime_hackbench-smp: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/qspi_mtd_dd_write_concurrence: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/qspi_modular_dd_rw: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/powermgr_runtime_pci: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/system_eth_smp_irq_affinity: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/fbdev_ioctl: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/spi_mtd_dd_rw_ubifs: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/nand_modular_multi_insmod_rmmod: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/mmc_sdcard_dd_rw_ext2: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/can_loopback: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/realtime_graphics_load-smp: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/multi_display: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/ddt/nand_mtd_nand2nand_ubifs: Cannot open: No such file or directory
    tar: ./opt: Cannot mkdir: Read-only file system
    tar: ./opt/ltp/runtest/nptl: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/uevent: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mount.nfs: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mkfs.msdos: Cannot create symlink to ‘mkfs.fat’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/runlevel: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/switch_root.util-linux: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/swapoff.util-linux: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fsck.ext4dev: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/iwgetid: Cannot create symlink to ‘iwconfig’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fsck: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mkfs.ext4dev: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fw_setenv: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/ip.iproute2: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/filefrag: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/sulogin: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fdisk.util-linux: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mkfs.ext2: Cannot hard link to ‘./sbin/mkfs.ext4dev’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/blkid: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/modprobe: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/insmod: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/rmmod: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/e2fsck: Cannot hard link to ‘./sbin/fsck.ext4dev’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/rtpr: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/vigr: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/dosfsck: Cannot create symlink to ‘fsck.fat’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/umount.nfs: Cannot create symlink to ‘mount.nfs’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fsck.vfat: Cannot create symlink to ‘fsck.fat’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/e2label: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/ifcfg: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mke2fs: Cannot hard link to ‘./sbin/mkfs.ext4dev’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fdisk: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/iwlist: Cannot create symlink to ‘iwconfig’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/lsmod: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mklost+found: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/iwpriv: Cannot create symlink to ‘iwconfig’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fsck.util-linux: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fsck.ext4: Cannot hard link to ‘./sbin/fsck.ext4dev’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/e4crypt: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/poweroff: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mkdosfs: Cannot create symlink to ‘mkfs.fat’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fsck.fat: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/umount.nfs4: Cannot create symlink to ‘mount.nfs’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fstrim: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/udevd: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/bridge: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/e4defrag: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mkfs.minix: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/dumpe2fs: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/ifdown: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/swapoff: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/hdparm.hdparm: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/routef: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/hwclock: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/ifup: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/vipw: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mkfs.minix.util-linux: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mount.nfs4: Cannot create symlink to ‘mount.nfs’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/ip: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/rtmon: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/debugfs: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mkswap.util-linux: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/blockdev: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/arp: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/e2freefrag: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/udhcpc: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/loadkmap: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/sysctl.procps: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fsck.msdos: Cannot create symlink to ‘fsck.fat’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mkfs.ext4: Cannot hard link to ‘./sbin/mkfs.ext4dev’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/depmod.kmod: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/badblocks: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/agetty: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/ctrlaltdel: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/logread: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/iwspy: Cannot create symlink to ‘iwconfig’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/syslogd: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mkswap: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/e2image: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/ifconfig: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/vipw.shadow: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/losetup: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/pivot_root: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fsck.ext2: Cannot hard link to ‘./sbin/fsck.ext4dev’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mount-copybind: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/start-stop-daemon: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/dosfslabel: Cannot create symlink to ‘fatlabel’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/ldconfig: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/tc: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/vconfig: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mkfs.ext3: Cannot hard link to ‘./sbin/mkfs.ext4dev’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fatlabel: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/reboot: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/vigr.shadow: Cannot create symlink to ‘vipw.shadow’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/insmod.kmod: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/switch_root: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/rmmod.kmod: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/pivot_root.util-linux: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/getty: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/modprobe.kmod: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fsck.ext3: Cannot hard link to ‘./sbin/fsck.ext4dev’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/sysctl: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/klogd: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/cfdisk: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/logsave: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mkfs.vfat: Cannot create symlink to ‘mkfs.fat’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/depmod: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/hdparm: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/shutdown: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/blockdev.util-linux: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/iwconfig: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/modinfo.kmod: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/populate-extfs.sh: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/nologin: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/mkfs.fat: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/swapon.util-linux: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fsck.minix: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fw_printenv: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/route: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/losetup.util-linux: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/sulogin.util-linux: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/tune2fs: Cannot hard link to ‘./sbin/e2label’: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/e2undo: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/fsck.minix.util-linux: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/modinfo: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/setconsole: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/swapon: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/init: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/halt: Cannot open: No such file or directory
    tar: ./sbin: Cannot mkdir: Read-only file system
    tar: ./sbin/routel: Cannot open: No such file or directory
    tar: ./tmp: Cannot mkdir: Read-only file system
    tar: ./srv: Cannot mkdir: Read-only file system
    tar: ./srv: Cannot mkdir: Read-only file system
    tar: ./srv/www: Cannot mkdir: No such file or directory
    tar: ./srv: Cannot mkdir: Read-only file system
    tar: ./srv/www/cgi-bin: Cannot mkdir: No such file or directory
    tar: ./srv: Cannot mkdir: Read-only file system
    tar: ./srv/www/cgi-bin/ssi: Cannot open: No such file or directory
    tar: ./srv: Cannot mkdir: Read-only file system
    tar: ./srv/www/cgi-bin/redirect: Cannot open: No such file or directory
    tar: ./srv: Cannot mkdir: Read-only file system
    tar: ./srv/www/cgi-bin/phf: Cannot open: No such file or directory
    tar: ./usr/bin: Cannot utime: Read-only file system
    tar: ./usr/bin: Cannot change ownership to uid 0, gid 0: Read-only file system
    tar: ./usr/bin: Cannot change mode to rwxr-xr-x: Read-only file system
    tar: ./usr/include/gdbm: Cannot stat: No such file or directory
    tar: ./usr/include: Cannot stat: No such file or directory
    tar: ./usr/arm-linux-gnueabi/bin: Cannot stat: No such file or directory
    tar: ./usr/arm-linux-gnueabi: Cannot stat: No such file or directory
    tar: ./usr: Cannot utime: Read-only file system
    tar: ./usr: Cannot change ownership to uid 0, gid 0: Read-only file system
    tar: ./usr: Cannot change mode to rwxr-xr-x: Read-only file system
    tar: ./bin: Cannot stat: No such file or directory
    tar: ./include: Cannot stat: No such file or directory
    tar: ./etc/rc2.d: Cannot stat: No such file or directory
    tar: ./etc/rcS.d: Cannot stat: No such file or directory
    tar: ./etc/network/if-post-down.d: Cannot stat: No such file or directory
    tar: ./etc/network: Cannot stat: No such file or directory
    tar: ./etc/init.d: Cannot stat: No such file or directory
    tar: ./etc/rc3.d: Cannot stat: No such file or directory
    tar: ./etc/xdg/systemd: Cannot stat: No such file or directory
    tar: ./etc/xdg: Cannot stat: No such file or directory
    tar: ./etc/fonts/conf.d: Cannot stat: No such file or directory
    tar: ./etc/fonts: Cannot stat: No such file or directory
    tar: ./etc/ssl/certs: Cannot stat: No such file or directory
    tar: ./etc/ssl: Cannot stat: No such file or directory
    tar: ./etc/rc4.d: Cannot stat: No such file or directory
    tar: ./etc/rc5.d: Cannot stat: No such file or directory
    tar: ./etc/rc1.d: Cannot stat: No such file or directory
    tar: ./etc/rc0.d: Cannot stat: No such file or directory
    tar: ./etc/systemd/system/local-fs.target.wants: Cannot stat: No such file or directory
    tar: ./etc/systemd/system/multi-user.target.wants: Cannot stat: No such file or directory
    tar: ./etc/systemd/system/network-online.target.wants: Cannot stat: No such file or directory
    tar: ./etc/systemd/system/sysinit.target.wants: Cannot stat: No such file or directory
    tar: ./etc/systemd/system/basic.target.wants: Cannot stat: No such file or directory
    tar: ./etc/systemd/system/getty.target.wants: Cannot stat: No such file or directory
    tar: ./etc/systemd/system/systemd-random-seed.service.wants: Cannot stat: No such file or directory
    tar: ./etc/systemd/system/bluetooth.target.wants: Cannot stat: No such file or directory
    tar: ./etc/systemd/system/sockets.target.wants: Cannot stat: No such file or directory
    tar: ./etc/systemd/system: Cannot stat: No such file or directory
    tar: ./etc/systemd: Cannot stat: No such file or directory
    tar: ./etc/rc6.d: Cannot stat: No such file or directory
    tar: ./etc/sysctl.d: Cannot stat: No such file or directory
    tar: ./etc: Cannot stat: No such file or directory
    tar: .: Cannot utime: Read-only file system
    tar: .: Cannot change ownership to uid 0, gid 0: Read-only file system
    tar: Exiting with failure status due to previous errors
    
    ERROR: executing tar xf /home/user/ti-processor-sdk-linux-automotive-dra7xx-evm-03_04_00_03/filesystem/tisdk-rootfs-image-dra7xx-evm.tar.xz -C /tmp/sdk/11774/rootfs
    
    
    

    Hi karthik,

    I am attaching the log with above mentioned commands.

  • Hi Deepthi,

    I went through the log and I see a few strange things.

    a. Your command for mksdboot.sh is not correct. Please note the "--sdk" instead of sdk that you have used.
    The format is sudo ${INSTALL_DIR}/bin/mksdboot.sh --device /dev/sdY --sdk ${INSTALL_DIR}
    b. Please also do a echo of $INSTALL_DIR and make sure it points to the right path.
    c. When we tried to use the command just like in your case "user@EESBLRP116:~/ti-processor-sdk-linux-automotive-dra7xx-evm-03_04_00_03$ sudo ${INSTALL_DIR}/bin/mksdboot.sh --device /dev/sdf sdk ${INSTALL_DIR}" the mksdboot script throws an error. Not sure how you are able to proceed.
    d. The log in your attachment has another anamoly - although you passed /dev/sdf, the 3rd line of the output indicates "THIS WILL DELETE ALL THE DATA ON /dev/sdd ". Note the sdd instead of sdf.

    So, I believe that there is some mismatch in the information provided. Kindly try the commands correctly and provide all this information.

    Regards
    Karthik
  • Hi Karthik,

    Thank you for supporting.
    I have changed my sd card and tried it is working fine.

    Thank you,
    Deepthi
  • Deepthi,

    Thanks for the confirmation. I'm marking this as closed now.

    Regards
    Karthik