Hi team,
Typical value of input impedance is 10kHz as the datasheet.
Could you share the distribution or similar one?
Is the distortion changed by Fs?
Best regards,
koyo
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
Typical value of input impedance is 10kHz as the datasheet.
Could you share the distribution or similar one?
Is the distortion changed by Fs?
Best regards,
koyo
Hi Koyo,
I can't share the distribution but I can say with process variation you could expect the input impedance to vary between devices by up to +/-20%. The input impedance does not change with sample rate for this device.
Best,
Zak