This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS3251: TAS3251EVM - reflow options

Part Number: TAS3251

Hi there,

I'm about to assemble our TAS3251EVM and am hoping you can give some guidance as to how best to solder each side in our reflow oven.  Which side do you recommend we reflow first, and therefore twice?  Are there any components that you believe should be secured before being reflowed twice to prevent them from falling off?

Many thanks for any tips you can offer!

Kind regards,

Mark