• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 90 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5825MEVM: Based on an SPI interface

May
Genius 9880 points
Part Number: TAS5825MEVM

Hi,

Is there an example implementations for a TDM implementation based on an SPI interface (or alternative)?

Thank you.

Regards,
Maynard

  • 0
    TI__Genius 13920 points

    Hello Maynard,

    There is no such example as our device only receives TDM/I2S signals. Our datasheet has information on the data format for TDM, but you would need to look at your codec/soc vendor for information on that if it is feasible. We do not have any recommendations or guidance on using SPI for TDM.

    Best regards,

    Luis