This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LME49724: compatability with DAC differential output to be used as balanced cable driver

Part Number: LME49724
Other Parts Discussed in Thread: OPA1637

Hi there,

I was looking through the LME49724 datasheet, and figure 53 gives a nice example of pairing the LME49724 for an ADC input, however, I'm after some assistance to design this product into my circuit so it can act as a balanced cable driver at the output of my differential DACs.

My DACs are for a balanced audio application.  They have 24-bit resolution, a full-scale output voltage of 1.76 Vrms (4.96 V p-p), and a common-mode reference output of 1.5 V.

Can you please help me with a product recommendation and design recommendation to achieve my requirements?

Many thanks!

Mark