PCM1690: Pls help review our SCH design

Fiona Yin

Prodigy 45 points

Part Number: PCM1690
Other Parts Discussed in Thread: TPA3220

Dear Sir/Madam,

PCM1690 converts the I2S signal from an audio module to TPA3220.

Pls help review our SCH design if need to improve, many thanks!6136.PCM1690.pdf

over 2 years ago

0 Arash Loloee over 2 years ago

TI__Mastermind 19340 points

Hello, I added this to my queue and will review it in the next couple of days and let you know.

Regards,

Arash

0 Fiona Yin over 2 years ago in reply to Arash Loloee

Prodigy 45 points

Look forward to your review comment, many thanks, Arash!

0 Arash Loloee over 2 years ago in reply to Fiona Yin

TI__Mastermind 19340 points

Sure Fiona.

Arash

0 Arash Loloee over 2 years ago in reply to Arash Loloee

TI__Mastermind 19340 points

Hello Fiona,

I went through the schematics and I noticed you used a different AC coupling for one of the outputs and 2 different LP filters (106k and 213k) for your outputs. Nothing out of ordinary though.

Regards,

Arash

TI makes no warranties and assumes no liability for applications assistance or customer product design. You are fully responsible for all design decisions and engineering with regard to your products, including decisions relating to application of TI products. By providing technical information, TI does not intend to offer or provide engineering services or advice concerning your designs.

Audio

Audio forum

PCM1690: Pls help review our SCH design