This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA1632: OPA1632 IC failure

Part Number: OPA1632


I am using OPA1632 in TIA configuration with supply voltage of +12 to V+ and -12 to V- and enable I kept at floating and common mode voltage (PIN 2) to 0V . The problem I am facing is my IC'S are getting heated up after some time and they are not functioning once heated. What is wrong with the setup I am unable to sort it out