This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5825P: I2C programming without I2S clock

Part Number: TAS5825P
Other Parts Discussed in Thread: TAS5825M

Hi team,

According to the datasheet, I2S clock is necessary to program DSP register. "DSP register" is defined as DSP memory maps in TAS5825M Process Flows document, e.g. equalizer, correct?

Other registers such as MUTE, Digital Volume can be programmed without I2S clock, because it's just in HiZ mode, is that correct? The customer's MCU stops I2S if there is no audio playing.

Regards,
Kazuto