This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Greetings
on a custom board we are trying to bring up TAS5766M part.
we are feeding BCLK, LRCLK and I2S data to I2S input port and can see same audio appear on I2S output (SDOUT). However there is no signal present on DACR pin and on power output pins (in mono configuration). we are lost as to why that is. any suggestion ?
Hello,
Can you read back your fault registers and confirm you properly initialized the I2C script to startup the device.
best regards,
Luis