Hi Team,
About TPA3128 in PBTL application, is must be directly connect LINP and LINN pin to GND? Can it be connected to GND through a low resistance (<10ohm) push-button switch?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
About TPA3128 in PBTL application, is must be directly connect LINP and LINN pin to GND? Can it be connected to GND through a low resistance (<10ohm) push-button switch?
Hi Kevin,
Yes, it can. please make sure the voltage is smaller than 0.7V on the pins.
Regards,
Derek