• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 185 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DIX9211: IC replacement with PCM9211

Jay Yoo
Intellectual 1826 points
Part Number: DIX9211
Other Parts Discussed in Thread: PCM9211,

Hi team,

I'd like to double check with you about p2p replacement between DIX9211 and PCM9211.

My customer is going to replace DIX9211 with PCM9211 without any schematic changes. 

I think it's perfectly fine to replace in this case. Am I right?

Here's current pin configuration:

  • They are not using ADC in PCM9211.
  • PIN 44 = OPEN
  • PIN 45,PIN 46 = AGND
  • PIN 47,PIN 48 = OPEN 

Thanks,

Jay

  • +1
    TI__Genius 16840 points

    Hi Jay,

    the connections you listed for pins 44-48 are OK for PCM9211. Since VCOM is generated from VCCAD ideally VCOM would also be connected to ground.  

    However if the customer does not want to change schematic/layout then floating VCOM is OK.

    Regards,

    Arthur