• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 1354 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5708, unused output

Terry16065
Expert 1185 points
Other Parts Discussed in Thread: TAS5708

I’m using a TI TAS5708 to drive one speaker on OUT_A and OUT_B (BTL configuration).  Since I’m not using the second output (OUT_C and OUT_D) can I disconnect or float PVCC_C and PVCC_D?  Will I still need the bootstrap capacitors BST_C and BST_D?  Do I need to terminate the unused outputs somehow?  In other words, what is the best way to minimize power and components if I am only using out_a and out-b?