The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5805M: Asking for TAS5805 sampling rate auto detection

Part Number: TAS5805M
Other Parts Discussed in Thread: TAS5805

Hi Team,

Customer is evaluating TAS5805 and the system I2S is 16bit/64Fs.

Do customer need to change the registers 0x28 and 0x33 as below? 

From 

0x28=0x00

0x33=0x02

to 

0x28=0x50

0x33=0x00

Or auto-detection sampling rate can handle this and customer do not need to do any register config?

Thanks for help!

BR,

SHH