• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 180 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS2552: TAS2552-Stuck

switch
Expert 2365 points
Part Number: TAS2552

Hi TI Team，

I encountered a problem when debugging TAS2552. When the sound is adjusted to the maximum, there will be a stuck phenomenon.

At the same time, it is verified that this situation still exists in the TI TAS2552 EVM.

  • 0
    TI__Guru* 95035 points

    Hi,

    I'll take a look at this behavior. By "sound adjusted to maximum" you mean the Class-D gain?
    Also stuck means the device is not responding to I2C and no sound is coming out? Or it keeps playing the same sample over and over?

    Best regards,
    -Ivan Salazar
    Applications Engineer

  • 0 in reply to Ivan Salazar
    TI__Guru* 95035 points

    I tried both increasing Class-D gain to max and at the same time input sweep up to 0dBFS, the device keeps operating normally. The output is clipping but it's not getting stuck.
    If you can share more details about your observations I can try to replicate on my side.

    Best regards,
    -Ivan Salazar
    Applications Engineer