TAS2563: Replacing the TAS2563RPPT in an existing design due to part out of stock

Hi Tim,

Does you application require the Smart Amp algorithm? Some of the devices you mentioned have this feature and some don't.
I'll add some options below:

• TAS2110 - This is similar to TAS2563 (QFN version) but without IV-sense nor integrated smart amp algorithm. However it features the same integrated boost
• TAS2562 - This is similar to TAS2563 (WCSP version) but without integrated smart amp algorithm, it only includes IV-sense feedback. It also features the same integrated boost
• TAS2764 - This device is a higher power IV-sense capable amplifier. It features Y-Bridge architecture at the Class-D supply for improved efficiency
• TAS2780 - Similar to TAS2764 but rated for higher voltage/power
• TAS2781 - This is the latest smart amp integrated device rated for higher power, it does not feature integrated boost but it includes Class-H controller (Hybrid-Pro) for external boost as well as Y-Bridge architecture

Best regards,
-Ivan Salazar
Applications Engineer

Hi Ivan,

for us it is important, that the components are readily available as we are currently running short in parts, even if we do really moderate quantities (up to 3000 a year).

From your list I would highlight the TAS2562 and discuss with our devlopers.

They chose the TAS2559 as a similar option, but you do not have it in your list. Could you tell, why you did not select it?

Best Regards,

Tim

Dear Ivan,

I have feedback for mour devolopers.

We use the digital Audio Tuning Option and they told me, that TAS2562 has been reviewed but was no alternative.

As in my other reply: Do you think the TAS2559 is a siutable replacement?

Best Regards,

Tim

Hi TIm,

TAS2559 is a previous version of the smart amp, so it includes the protection algorithm and would make it suitable. There are some differences in the features though, you may check these two devices in PPC3 to get an idea of what you get and loose between these two versions.

Best regards,
-Ivan Salazar
Applications Engineer

Dear Ivan,

we got an Evalboard a few weeks back and found out, that it should be basically suitable for our purpose. Since than we learned that the production of PCBA with the different footprint will be a little more difficult. Nevertheless, we keep evaluating. I was just hopeing to find some other alternative that might save us some time redesigning the PCB. 

Looking at it from this perspective. Do you see any other TAS2563 and TAS2559 alternatives?

Additionally, we just learned last week that there still some TAS2563 in inventory and I am hopeing to buy some of these, a the redesign for the older and in our case newer TAS2559 takes longer than expected.

Finally, is there a way to place an order for TAS2563 for the upcoming production in Q1/23 before there is inventory a available?

Best Regards,

Tim Mackerodt

Hi Tim,

I think we've covered basically all smart amp related devices in this thread already. there is no direct pin to pin replacement, I understand changing your design both on hardware and software side would take time.

I don't really have further information about ordering units in advance, you may need to contact your local sales office for that purpose.

Best regards,
-Ivan Salazar
Applications Engineer

Dear Ivan,

thank you for your support. I will reach out to TI-Germany in Eschborn, but I would also kindly ask to put me in touch with someone from the global sales team, because last time we ordered directly from the TI-global shop.

Best Regards,

Tim

HI Tim,

I'll check how we can route your request, this is not common for Apps team support.

Best regards,
-Ivan Salazar
Applications Engineer

Hello Ivan, 

This sounds good to me! Hopeing the best.

Best Regards,

Tim

Hi Tim,

Please wait until our audio experts have commented to continue the thread. Thank you for your patience