This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV320AIC3120EVM-U: I2S with external controller

Part Number: TLV320AIC3120EVM-U

Hi,

In the forum its mentioned that to establish I2S communication with an external controller we need to pull-up I2S_ENABLE pin.

For this purpose, can you suggest the best way to enable it.

One I know is removing R13 and then connected 3.3 to I2S_ENABLE

Is it possible to give 3.3 at Pin1.2 without removing the R3.

Thanks & Regards,

Dheeraj