• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 162 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS6424-Q1: S2P - VOUTN vs PVDD and VOUTN vs Rshort_PVDD

Yi Chang Chen
Prodigy 20 points
Part Number: TAS6424-Q1
Other Parts Discussed in Thread: TAS6424

Hello,

In TAS6424 datasheet, page 6, S2P - Maximum resistance to detect a short from OUT pins to PVDD is 500 ohms.

Do you have measurement for VOUTN vs PVDD and VOUTN vs Rshort_PVDD?

Thanks and Regards

Chen Yi Chang

  • 0
    TI__Mastermind 34305 points

    Hello,

    We do not have any graphs available to detail the relationships you request.  The maximum value of 500 ohms is the worst case from our testing and evaluation of the device.  All devices will trigger a fault with a resistive short less than 500 ohms.

    Regards
    Gregg Scott