• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 100 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS2110: TAS2110 PVDD current consumption during idle mode.

MOTOTW
Intellectual 375 points
Part Number: TAS2110

Hi,

would like to know the PVDD current consumption for internal PVDD (VBST) as I noticed the data sheet only shows the pvdd idle current for external pvdd.

  • 0
    TI__Guru* 95285 points

    Hi Mototw,

    The internal boost is not enabled while idle. Internal boost operates based on the input signal amplitude; in addition, it's based off VBAT input so you may consider idle VBAT current consumption instead.

    Best regards,
    -Ivan Salazar
    Applications Engineer