Other Parts Discussed in Thread: SRC4392, PCM5141, PCM5142
Hi team,
I am testing PCM5142EVM-U for customer. I used USB input because I don't have SPDIF source in our lab.
I configured EVM based on this thread: https://e2e.ti.com/support/audio-group/audio/f/audio-forum/399753/split-pcm5141-96k-not-working?tisearch=e2e-sitesearch&keymatch=PCM5141%2096K#
And I used Audacity as audio source. Headers are placed as below:
When I play an audio signal(1kHz Tone), I can't get SDIN signal(BCLK and WCLK were normal) in the output of TAS1020B and no signal on the SRC4392 I2S output.
If the configuration don't support USB input? Any other possibilities?
BRs
Kian
Thanks
BRs
Kian