Other Parts Discussed in Thread: CC2564MODN,
I'm working with the TLV320AIC33 codec and using I2S as the Audio Serial Data Interface. The codec is configured as the master, and on the other side, there's a CC2564modn Bluetooth device. The audio generated by the codec is being heard through the Bluetooth headphones, but when I speak into the headphone's microphone, I'm not seeing a clean audio signal at the MONO_LOP output of the codec, despite adjusting the DAC_L1 to MONO_LOP/M and MONO_LOP/M Output Level Control Registers. I'm not using LEFT_LOP and RIGHT_LOP in the project; only the MONO_LOP output is used. How can I solve this issue?
Thank you in advance.