TPA3116D2: TPA3116D2

Hi 

   Sorry that seems this model is long time ago and no longer fit to current Pspice version. Could we use TINA model at the production page? Thank you.

Do you mean the tpa3116D2 TINA-TI Spice Mode? I tried this model before,it does't work.

Hi

 How about two Reference Design, use TINA software to simulate directly?

Thank you,I solve this problem.

I wanna kown how the tap3116d2 connect to the adc5311?

Hi

  In the simulation, use DAC5311 replace VG1 should be fine. Connect the output of DAC5311 to the input of TRCT1. 

Thank you,I successed in connecting the tpa3116d2 to adc5311.

I I wanna produce a current source-the power is 40w,the higher frequency is 650khz,the lower frequency is 150kHz,the voltage requires 5V. The current looks like in the figure.

I wanna kown what kind of the current i should input and how i should input