This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCM2912A: Pop noise Issue

Part Number: PCM2912A

Hello Technical Expert,

We are facing a pop noise Issue in our system board when we do the following steps:

1. On power up/down of a system

2. Switching from one input to another

3. On USB cable unplugged

Schematic design of codec:

Scope capture of Audio outputs:

Scope_codec.zip

Please look into the issue. If you find the solution to pop, please share the information.

Thanks and Regards,

Mohit