• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 427 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA1633: Looking for a Mono Headphone Amp

Jay Yoo
Intellectual 2611 points

Part Number: OPA1633

Hi team,

My customer is looking for a headphone amp for their new gaming headset application.

Could you recommend an AMP which fits below customer's requirements? I've already checked our TPA61xx series. But they were all stereos. So I wondered if there was a solution in OpAMPs.

  • Mono
  • Supply voltage: 3.3V
  • Input: Differential
  • Output power: 100mW @ 32Ohm
  • smaller than (4.5mm x 4.5mm)

Thanks,

Jay

  • 0
    TI__Expert 6050 points

    Hi Jay,

    Op amps like the OPA1633 are typically used as a preamplifier stage for an application specific speaker amplifier stage if the signal needs any kind of conditioning or gaining before being input into a speaker amp. Based on your question, I am under the assumption that you are looking for a speaker amplifier and do not need a preamplifier stage. 

    TI offers speaker amps that are used in mono applications. I have included a link that has a filtered list of mono speaker amps that may fit your application need:

    https://www.ti.com/audio-ic/amplifiers/speaker-amplifiers/products.html#342=0.325%3B5&1055max=Mono&2622min=1.5%3B3&

    These amplifiers are covered by a different team and I do not have the expertise to speak on specifics to these devices. If you have specific questions about a specific device in that list, I recommend opening a new E2E thread for that device. 

    If you are in need of a preamplifier stage, I would be happy to assist further. 

    Thanks,

    Nick