• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 178 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TAD5242: RTM schedule?

TAD5242: SUPPLY CURRENT CONSUMPTION

Jan Kruczalak
Prodigy 30 points
Part Number: TAD5242

TAD5242 datasheet for IAVDD current consumtpion gives: TBD.

Are approximate values available?

Best regards

  • 0
    TI__Expert 5905 points

    Hey Jan, 

    Like Sakshi mentioned in the e2e post. That information would be available in 3Q 2024. 

    As far as an approximate value for IAVDD, allow till the end of the week to get a response on that. 

    Regards,

    Ore. 

  • 0
    TI__Expert 5905 points

    Hey Jan, 

    Expect an update next week. 

    Regards,

    Ore. 

  • 0
    TI__Expert 5905 points

    Hey Jan, 

    Based off TI lab measurements, an approximate idle channel current consumption for AVDD with respect to the input level, frequency and load is 25mA with +-5mA leeway.

    Below is the test condition for this measurement:

    • Target Mode, Fs=48 kHz, Line-Out, FD, 2 channels enabled, AVDD=3.3V, bclk-fs ratio=64

    This information is not mentioned on the datasheet and should not be considered as a spec for the TAD5242.

    Regards,

    Ore.