Other Parts Discussed in Thread: TAS5548
Hi
How to set BD mode in PBTL configuration?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
It will decided by the input. If the input provided a BD mode, the output will follow.
hi PYT
base on below description, you need to input BD modulated signal, also chose corresponding mode selection pins, the the BD mode can be realized.
i assume you use the tas5548 as upper processor, then refer below register, might help you setting the BD output for tas5548 which be inputted to tas5634.
tas5548 datasheet.
tks
jess