Tool/software:
Hi TI team,
Regarding the TAS6584-Q1 Realtime diagnosis, only AC diagnosis possible for tweeter speakers?.
And also Woofer+tweeter speaker need to perform realtime DC diagnosis followed by AC diagnosis.
Thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi TI team,
Regarding the TAS6584-Q1 Realtime diagnosis, only AC diagnosis possible for tweeter speakers?.
And also Woofer+tweeter speaker need to perform realtime DC diagnosis followed by AC diagnosis.
Thanks
Hi,
There are three diagnosis methods in the TAS6584-Q1.
Regards,
Gregg Scott
Hi Gregg,
Thanks for your detailed response.
Well noted, in addition to this
1. I would like to get the TAS6584-Q1 fault time for DC diagnosis and AC diagnosis. Can you please provide this information.
2. what is the delay time expected when we switch from DC to AC diagnosis, like after the DC, we need to provide any delay for I2C configurations before the AC diagnosis starts?
3. Can you able to provide the AC diagnosis impedance measurements time without phase?
Hi Madhaiyan,
Regards,
Gregg Scott