• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 63 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS6421-Q1: Does the TAS6421-Q1 have a setting for THD+N similar to the TPA6304-Q1 regarding CLIP?

Alan Xia
Expert 6075 points
Part Number: TAS6421-Q1
Other Parts Discussed in Thread: TPA6304-Q1

Tool/software:

Hi team,

Does the TAS6421-Q1 have a setting for THD+N similar to the TPA6304-Q1 regarding CLIP?

If not, what is our default clipping THD+N? 10%?

  • 0
    TI__Mastermind 36960 points

    Hi Alan

      TAS6421 also support clip detect. 

      When output reach 100% THD for certain PWM cycles, default is 20 cycles and adjustable, will report clip. 20 cycles will similar to 2% THD, customer could adjust it to set the trigger point.